After Automatic Search is completed, the following message, asking for analogue channel search, appears on the screen.
To search for analogue channels, select “Yes”. TV switches to the analogue TV mode. A menu will be displayed to search for analogue channels.
Set Language item by pressing “
” or “
” button. Press “
” or “
” button to highlight Country item and then use “
” or “
” to set. Press “
” or “
” button to highlight TXT. Language. Set TXT Language by using “
” or “
” button. To cancel, press the BLUE button. When finished, press OK or RED button to continue and the following OSD will be displayed:
After automatic tuning is finalized, a programme list will appear on the screen. In the programme list you will see the programme numbers and names assigned to the programmes.
If you do not accept the locations and/or the names of the programmes, you can change them in Program table. For details, see the section, “Program table”.
General Operation
Press the SOURCE button and select DTV from the list. The TV then switches to digital TV mode.
Information Screen
•Whenever you change the channel using the P + or P - button or numeric buttons, the TV displays the broadcast picture along with an information banner at the bottom of the screen. This will remain on the screen for approximately a few seconds.
•The information banner can also be displayed by pressing the INFO button at any time while watching the TV. Pressing INFO button again removes the banner.
When info banner is on screen, you can use Up or Down cursor buttons to browse channels.
If the selected channel is locked, you must enter the correct four digit key to view the channel. In this case, a dialog box asking for the lock key will be displayed:
Electronic Programme Guide (EPG)
Some, but not all, channels send information about the current and next events. Please note that event information is updated automatically. If there are no event information data available for channels,EPG will be displayed with blanks.
•Press EPG button to view the EPG menu.
•Press “
” or “
” buttons to navigate through channels.
•Press “
” or “
” buttons to navigate through the programme list.
English - 15 -
17.06.2010 13:10:08 |