the programme numbers and names assigned to the programmes.
Manual Search
In Manual Search, the number of the multiplex is entered manually and only that multiplex is searched for the channels. For every valid channel number, signal level and signal quality are shown on the screen.
In both manual and auto search any existing channel in the database is not
First Time Installation
The user can use this item to load default settings, which were loaded to the receiver at the factory.
To install factory settings, highlight “First Time Installation” menu item and press OK button, then you will be asked whether or not to delete the settings. Selecting “Yes” by pressing OK button while the “Yes” is highlighted, will delete the existing channel table.
After factory settings are loaded, a message asking for automatic search appears on the screen:
Highlight “Yes” item by pressing “
” or “
” buttons and press OK button to start installation. After search is completed for digital channels, a message asking whether to search for analogue channels appears on the screen. This process is same as described in
Automatic Search section.
Analogue TV Menu System
Picture Menu
English
Mode
For your viewing requirements, you can set the related mode option.
Press “
” or “
” button to select Mode. Press “
”or “
” button to choose from one of these options: Natural, Cinema and Dynamic..
Contrast/Brightness/Sharpness/Colour/ Hue
Press “
” or “
” button to select the desired option. Press “
” or “
” button to set the level.
Note: Hue option can only be visible when the TV receives an NTSC signal.
Colour Temp
Press “
” or “
” button to select Colour Temp. Press “
” or “
” to choose from one of these options: Normal, Warm and Cool..
Note:
•For normal colours, select Normal option.
•Setting Warm option gives white colours a slight red stress.
•Setting Cool option gives white colours a slight blue stress.
Noise Reduction
If the broadcast signal is weak and the picture is noisy, use Noise Reduction setting to reduce the noise amount.
Press “
” or “
” button to select Noise Reduction. Press “
” or “
” to choose from one of these options: Low, Medium, High or Off.
Film Mode
Films are recorded at a different number of frames per second to normal television programmes.
Press “
” or “
” button to select Film Mode.
Press “
” or “
” button to set this feature On or Off.
Turn this feature on when you are watching. films to see the fast motion scenes clearly.
Game Mode (optional)
Select Game Mode by pressing “
” or “
” button. Use “
” or “
” button to set Game Mode as On or Off. When Game Mode is set to On, specific game mode settings, which are optimized for better video quality, will be loaded.
Also; Picture Mode, Contrast, Brightness, Sharpness, Colour and Colour Temp settings will be invisible and disabled while Game Mode is on.
Note:
Picture mode selection button on the remote control will have no function while Game Mode is on.
- 22 -
17.06.2010 13:10:11 |