Input Selection
Once you have connected external systems to your TV, you can switch to different input sources.
•Press “SOURCE” button on your remote control for directly changing sources.
or,
•Select “Source” option from the main menu by using “
” or “
” button. Use then “
” or “
” button to highlight an input and press “
” button to select.
Note: You can mark desired source options by pressing the
OK button. Therefore, when “SOURCE” button is pressed, only the marked source options will be available (except for the TV source).
Basic Operations
You can operate your TV using both the remote control and onset buttons.
Operation with the Buttons of the TV
Volume Setting
•Press “
” button to decrease volume or 
button to increase volume, so a volume level scale (slider) will be displayed on the screen.
Programme Selection
•Press “P/CH +” button to select the next programme or “P/CH
Viewing Main Menu
•Press the “MENU” button to enter main menu. In the main menu select
+” buttons and enter the 
” or
“
” buttons. To learn the usage of the menus, refer to the menu system sections.
AV Mode
•Press the “TV/AV” button in the control panel on the TV to switch between AV modes.
English
Operation with the Remote Control
•The remote control of your TV is designed to control all the functions of the model you selected. The functions will be described in accordance with the menu system of your TV.
•Functions of the menu system are described in the following sections.
Volume Setting
•Press “V+” button to increase the volume. Press “V
Programme Selection (Previous or Next Programme)
•Press “P
•Press “P +” button to select the next programme.
Programme Selection (Direct Access)
•Press numeric buttons on the remote control to select programmes between 0 and 9. The TV will switch to the selected programme. To select programmes between 10 - 1000 (for IDTV) or
Initial Settings
When the TV is turned on for the first time, it is in the digital mode. Because this is the first time the TV is used, there are no channels stored in the memory and the following message appears on the screen.
•To select the “Yes” or “No” option, highlight the item by using “
” or “
” buttons and press OK button.
The IDTV will automatically tune to the transmission channels, searching for digital terrestrial TV broadcasts and displaying the names of channels found. This process will take a few minutes. To cancel searching, you can press MENU button at any time during the process. The following OSD will be displayed during the automatic search:
- 14 -
17.06.2010 13:10:07 |