picture on the screen. In such a case you can use this item to get a clear picture by trial and error method.
Select Phase item by using “
” or “
” buttons. Use “
” or “
” button to adjust the value.
Dot Clock
Dot Clock adjustments correct the interference that appear as vertical banding in dot intensive presentations like spreadsheets or paragraphs or text in smaller fonts.
Select Dot Clock item by using “
” or “
” buttons. Use “
” or “
” button to adjust the value.
PC Picture Menu
For adjusting PC picture items, do the following: Press “
” or “
” button to select the second icon. PC Picture menu appears on the screen.
Contrast, Brightness, Colour and Colour Temperature settings in this menu are identical to settings defined in TV picture menu under “Analogue TV Menu System”.
Note: If you set Colour Temp as User, you can define R, G, B settings manually.
Sound,Feature and Source settings are identical to thesettings explained in Analog Tv menu system.
Displaying TV Information
Programme Number, Programme Name, Sound Indicator and Zoom Mode information is displayed on the screen when a new programme is entered or INFO button is pressed.
When you are in DTV Mode and press “
” or “
”button, the Information of the previous or next programme is displayed. To switch to the displayed, programme just press OK button.
Mute Function
Press “
” button to disable sound. Mute indicator will be displayed in the upper side of the screen.
To cancel mute, there are two alternatives; the first one is pressing the “
” button and the second one is increasing the volume level.
Picture Mode Selection
By pressing PRESETS button, you can change Picture Mode settings in accordance with your viewing requirements. Available options are Dynamic, Natural and Cinema.
Note : This function will not be available while in PC mode.
Freezing Picture
You can freeze the picture on the screen by pressing the “OK” button on the remote control in TV mode. Press the “OK” button to freeze picture. Press again to quit freeze mode (available only in analogue TV mode).
English
Zoom Modes
You can change the aspect ratio (image size) of the TV for viewing the picture in different zoom modes.
Press “SCREEN” button to directly change the zoom mode.
Available zoom modes are listed below.
Note:
In YPbPr and HDMI modes, while in
In PC mode, only 16:9 mode is available.
Auto
When a WSS (Wide Screen Signalling) signal, which shows the aspect ratio of the picture, is included in the broadcast signal or the signal from an external device, the TV automatically changes the ZOOM mode according to the WSS signal.
•When the AUTO mode does not function correctly due to poor WSS signal quality or when you want to change the ZOOM mode, change to another ZOOM mode manually.
16:9
This uniformly stretches the left and right sides of a normal picture (4:3 aspect ratio) to fill the wide TV screen.
•For 16:9 aspect ratio pictures that have been squeezed into a normal picture (4:3 aspect ratio), use the 16:9 mode to restore the picture to its original shape.
4:3
Use to view a normal picture (4:3 aspect ratio) as this is its original size.
Panoramic
This stretches the left and right sides of a normal picture (4:3 aspect ratio) to fill the screen, without making the screen.
The top and bottom of the picture are slightly cut off.
14:9
This zooms up the wide picture (14:9 aspect ratio) to the upper and lower limits of the screen.
- 28 -
17.06.2010 13:10:16 |