PC Mode Menu System, Playing .mp3 Files

•If you enter the Media Browser menu without plugging a USB device to the TV, “No USB Device” message will be displayed on the menu screen.

Note: Unknown ﬁle formats will be marked with a question mark.

You can use the following remote control buttons to browse between ﬁles stored on your USB drive:

Up / Down	Explores the ﬁles.
OK	Views / plays a selection /
	enter folder.
Menu	Back.
Red	Filters JPG ﬁles.
GREEN	Filters MP3 ﬁles.
“ ” / “ ”	Select next or previous
	ﬁle.

Playing .mp3 Files

If you play a mp3 ﬁle, the following screen will be displayed during the playback:

You can use cursor buttons on the remote control for available functions.

Playing .jpg Files

If you play a jpg ﬁle, the following screen will be displayed while viewing:

You can use cursor buttons on the remote control for available functions.

PC Mode Menu System

See “Connecting the LCD TV to a PC” section for connecting a PC to the TV set.

For switching to PC source, press “SOURCE” button on your remote control and select PC input. You can also use “Source” menu to switch to PC mode.

Note that PC mode menu settings are available only while the TV is in PC source.

PC Position Menu

Select the first icon by pressing “ ” or “” button. PC Position menu appears on the screen:

Autoposition

If you shift the picture horizontally or vertically to an unwanted position, use this item to put the picture into correct place automatically. This setting therefore automatically optimizes the display.

Select Autoposition item by using “” or “” buttons. Press OK or “”, “” button.

Warning: Please ensure auto adjustment is performed with a full screen image to ensure best results.

H (Horizontal) Position

This item shifts the image horizontally to right hand side or left hand side of the screen.

Select H Position item by using “” or “” button. Use “” or “” button to adjust the value.

V (Vertical) Position

This item shifts the image vertically towards the top or bottom of the screen.

Select V Position item by using “” or “” button. Use “” or “” button to adjust the value.

Phase

Depending on the resolution and scan frequency that you input to the TV set, you may see a hazy or noisy

English - 27 -

A01_MB38_[GB]_3902UK_IDTV-T2_GOLD7_42884W_10068537_50167165.indd 27

17.06.2010 13:10:15