Pioneer XV-DV250 operating instructions DVD/CD/Video CD player, STANDBY/ON button

Additional information 08

DVD/CD/Video CD player

Problem	Remedy
The disc is ejected	• Clean the disc and align the disc properly in the disc guide.
automatically after	• If the region number on a DVD-video disc does not match the number on
loading.	the player, the disc cannot be used (see DVD Video regions on page 31).
	• Allow time for any condensation inside the player to evaporate. Avoid using
	the player near an air-conditioning unit.

Playback not possible. • If the disc is loaded upside down, reload the disc with label side face up.

Picture playback stops	• Press (stop), then (play) to start playback again.
and buttons cannot be	• Switch the power off once, then on again using the front panel
used.	STANDBY/ON button.
Settings are canceled.	• When the power is cut, settings will be canceled.
No picture/No color.	• Check that connections are correct and that plugs are inserted fully.
	• Check the manual of the TV/monitor to make sure the settings are correct.
Screen is stretched or	• The TV Screen setting is incorrect. Set the TV Screen option to match the
aspect doesn’t change.	TV/monitor you're using (see Video Output settings on page 20).
When recorded on a	• This system uses copy-protection technology which may prevent recording
VCR or passed through	or cause picture problems when connected through a VCR or AV selector.
an AV selector, there is	This is not a malfunction.
disturbance in the
playback picture.
Picture disturbance	• This player is compatible with Macro-Vision System copy guard. Some
during playback or	discs include a copy prevention signal, and when this type of disc is played
dark.	back, stripes etc., may appear on some sections of the picture depending on
	the TV. This is not a malfunction.
	• Discs respond differently to particular player functions. This may result in
	the screen becoming black for a brief instant or shaking slightly when the
	function is executed. These problems are largely due to differences between
	discs and disc content and are not malfunctions of this player.
Noticeable difference	• DVDs and CDs use different recording methods. This is not a malfunction.
in DVD and CD
volume.
CD-ROM disc is not	• Make sure that the CD-ROM was recorded using the ISO 9660 disc format.
recognized by the	See Disc compatibility table on page 30 for other disc compatibility
system.	information.
Files don’t show up in	• The files on the disc must be named with the correct file extension: .mp3
the Disc Navigator/	for MP3 files; .wma for WMA files; .jpg for JPEG files (upper or lower-case is
Photo Browser.	OK). See Disc compatibility table on page 30 for more on this.
Can’t play WMA files.	• The files were recorded using DRM (digital rights management). This is not
	a malfunction.

English Deutsch Français Italiano Nederlands Español

35

En