Using the component video jacks

Connecting your equipment

3 If the device can output digital audio, connect an

optical-type1digital audio output from the recorder to the OPTICAL IN 2 (DVR1) input.

Use an optical cable for the connection.2

Component video should give superior picture quality when compared to composite or S-Video. You can also take advantage of progressive scan video (if your source and TV are both compatible), which delivers a very stable, flicker-free picture. See the manuals that came with your TV and source component to check whether they are compatible with progressive-scan video.

1Connect the component video outputs of your source to a set of ASSIGNABLE COMPONENT VIDEO inputs.

Connect using a three-way component video cable.

•Since they are assignable, it doesn’t matter which component video inputs you use for which source. After connecting everything, you’ll need to assign the component video inputs—see The Input Setup menu on page 69.

2Connect the COMPONENT VIDEO MONITOR OUT jacks to the component video inputs on your TV or monitor.

Use a three-way component video cable.

COMPONENT

VIDEO

MONITOR

COMPONENT VIDEO

MONITOR

ANTENNA

OUT

IN 1

IN 2

IN 3

OUT

AM LOOP

DVR1

DVR2

OUT

FRONT

(Single) PRE OUT

CD-R

SUBWOOFER SURROUND SURROUND BACK

TI CH IN

SPEAKERS

FRONT

CENTER

SURROUND

SURROUND BACK / B

(Single)

SURROUND SURROUND BACK

SELECTABLE

SEE INSTRUCTION MANUAL

SELECTABLE

VOIR LE MODE D'EMPLOI

VSX-01TXH

	Y
	PB
	PR
1	COMPONENT
1	VIDEO

DVD player

Connecting digital audio sources

This receiver has both digital inputs and outputs, allowing you to connect digital audio components for playback and for making digital recordings.

Most digital components also have analog connections. See Connecting analog audio sources on page 20 if you want to connect these too.

VSX-01TXH

HDMI				S-					MO
	COAXIAL			VIDEO IN	IN	OUT	IN	OUT	IN
	COAXIAL
	ASSIGNABLE 1 - 2
OUT	IN 1			VIDEO
OUT	IN 1
	(DVD)
		RS-232C
	IN 2
BD IN	(CD)			DVD	TV SAT	DVR1		DVR2	S
BD IN
	XM IN			AUDIO
	XM IN	CON-	IN	IN	IN	OUT	IN	OUT	IN
	OPTICAL	TROL		L
	OPTICAL			L
IN 1	IN 1		OUT
IN 1	(TV SAT)
	IN 2			R
	IN 2	IR
	(DVR1)	IR
								SPEAKERS F
IN 2	ASSIGNABLE				MULTI CH IN			A R
	1 - 2				MULTI CH IN
ASSIGN-
ABLE				FRONT	CENTER	SURROUND SURROUND BACK
1 - 2	OUT			FRONT	CENTER	SURROUND SURROUND BACK
1 - 2	OUT
			1	L
		12 V TRIGGER		L
		12 V TRIGGER
			2
DIGITAL		(OUTPUT
DIGITAL		12 V	TOTAL	R
		50 mA MAX)

SUBWOOFER


OPTICAL	OPTICAL		COAXIAL

DIGITAL IN		DIGITAL OUT

CD-R, MD,

DAT, etc.

Note

1• In order to record, you must connect the analog audio cables (the digital connection is for playback only).

•If your video component doesn’t have a digital audio output, you can skip this step.

2If your recorder only has a coaxial digital output, you can connect it to one of the coaxial inputs on this receiver using a coaxial digital audio cable. When you set up the receiver you’ll need to tell the receiver which input you connected the recorder to (see also The Input Setup menu on page 69).