Pioneer P6800MP DIN Rear-mount, Fixing the front panel, Remove the frame. Fig, Frame

Installation <ENGLISH>

DIN Rear-mount

Installation using the screw holes on the side of the unit

1. Remove the frame. (Fig. 8)

Frame

To remove the frame, extend top and bottom of the frame outwards in order to unlock it. (When reattaching the frame, point the side with a groove downwards and attach it.)

• It becomes easy to remove the frame if the front panel is released.

Fig. 8

2.Fastening the unit to the factory radio mounting bracket. (Fig. 9) (Fig. 10)

Select a position where the screw holes of the bracket and the screw holes of the head unit become aligned (are fitted), and tighten the screws at 2 places on each side. Use either truss screws (5 ⋅ 8 mm) or flush surface screws

(5 ⋅ 9 mm), depending on the shape of the screw holes in the bracket.

Fixing the front panel

If you do not operate the removing and attaching the front panel function, use the supplied fixing screw to fix the front panel to this unit.

Fixing screw

Fig. 11

Fig. 9

Screw

Dashboard or Console

Factory radio mounting bracket

Fig. 10