Playing tracks in random order

MAN-DEH-P4800MP-GB.fm Page 15 Thursday, September 29, 2005 11:55 AM

Built-in CD Player

Random play lets you play back tracks on the CD in a random order.

1.Press FUNCTION to select RDM.

Press FUNCTION until RDM appears in the display.

2.Press 8 to turn random play on.

RDM :ON appears in the display. Tracks will play in a random order.

3.Press 2 to turn random play off.

RDM :OFF appears in the display. Tracks will continue to play in order.

Scanning tracks of a CD

Scan play lets you hear the first 10 seconds of each track on the CD.

1.Press FUNCTION to select SCAN.

Press FUNCTION until SCAN appears in the display.

2.Press 8 to turn scan play on.

SCAN :ON appears in the display. The first 10 seconds of each track is played.

3.When you find the desired track press 2 to turn scan play off. SCAN :OFF appears in the display. The track will continue to play.

•If the display has automatically returned to the playback display, select SCAN again by pressing FUNCTION.

Note

•After scanning of a CD is finished, normal playback of the tracks will begin again.

Pausing CD playback

Pause lets you temporarily stop playback of the CD.

1.Press FUNCTION to select PAUSE.

Press FUNCTION until PAUSE appears in the display.

2.Press 8 to turn pause on.

PAUSE:ON appears in the display. Play of the current track pauses.

3.Press 2 to turn pause off.

PAUSE:OFF appears in the display. Play will resume at the same point that you turned pause on.

Using compression and BMX

Using the COMP (compression) and BMX functions let you adjust the sound playback quality of this player. Each of the functions has a two-step adjustment. The COMP function balances the output of louder and softer sounds at higher volumes. BMX controls sound reverberations to give playback a fuller sound. Listen to each of the effects as you select through them and use the one that best enhances the playback of the track or CD that you are listening to.

1.Press FUNCTION to select COMP.

Press FUNCTION until COMP appears in the display.

2.Press 8 or 2 to select your favorite setting.

Press 8 or 2 repeatedly to switch between the following settings: COMP OFF – COMP 1 – COMP 2 – COMP OFF – BMX 1 – BMX 2

Selecting the search method

You can switch the search method between fast forward/reverse and searching every

10 tracks.

1.Press FUNCTION to select FF/REV.

Press FUNCTION until FF/REV appears in the display.

• If the search method ROUGH has been previously selected, ROUGH will be displayed.

2.Press 4 or 6 to select the search method.

Press 4 or 6 until the desired search method appears in the display.

• FF/REV – Fast forward and reverse

• ROUGH – Searching every 10 tracks

Searching every 10 tracks in the current disc

If a disc contains over 10 tracks, you can search every 10 tracks. When a disc contains many tracks, you can roughly search for the track you want to play.

1.Select the search method ROUGH.

Refer to “Selecting the search method” on this page.

2.Press and hold 4 or 6 to search every 10 tracks on a disc.

•If a disc contains less than 10 tracks, pressing and holding 6 recalls the last track of the disc. Also, if the remaining number of tracks after searching every 10 tracks is less than 10, pressing and holding 6 recalls the last track of the disc.

ENGLISH