Pioneer P4800MP Adjusting source levels, Initial Settings, Adjusting initial settings

Page 28

MAN-DEH-P4800MP-GB.fm Page 28 Thursday, September 29, 2005 11:55 AM

Audio Adjustments

Adjusting source levels

SLA (source level adjustment) lets you adjust the volume level of each source to prevent radical changes in volume when switching between sources.

•Settings are based on the FM tuner volume level, which remains unchanged.

1.Compare the FM tuner volume level with the level of the source you wish to adjust.

2.Press AUDIO to select SLA.

Press AUDIO until SLA appears in the display.

3.Press 8 or 2 to adjust the source volume.

Each press of 8 or 2 increases or decreases the source volume.

SLA : +4 – SLA : –4is displayed as the source volume is increased or decreased.

Notes

•Since the FM tuner volume is the control, it is not possible to apply source level adjustments to the FM tuner.

•The MW/LW tuner volume level can also be adjusted with source level adjustments.

•The built-in CD player and the multi-CD player are set to the same source level adjustment volume automatically.

•External unit 1 and external unit 2 are set to the same source level adjustment volume automatically.

Initial Settings

Adjusting initial settings

Using the initial settings, you can customize various system settings to achieve optimal performance from this unit.

￿ Function display

Shows the function status.

1. Press SOURCE and hold until the unit turns off.

2.Press SOURCE and hold again until function name appears in the display.

3.Press FUNCTION to select one of the initial settings.

Press FUNCTION repeatedly to switch between the following settings:

FM (FM tuning step) – A-PI(auto PI seek) – AUX1 (auxiliary input1) – AUX2 (auxiliary input2) – R-SP(rear output and subwoofer controller) – SAVE (power save)

•To cancel initial settings, press BAND.

•You can also cancel initial settings by holding down SOURCE until the unit turns off.

Setting the FM tuning step

Normally the FM tuning step employed by seek tuning is 50 kHz. When AF or TA is on, the tuning step automatically changes to 100 kHz. It may be preferable to set the tuning step to 50 kHz when AF is on.

1.Press FUNCTION to select FM.

Press FUNCTION repeatedly until FM appears in the display.

2.Press 4 or 6 to select the FM tuning step.

Pressing 4 or 6 will switch the FM tuning step between 50 kHz and 100 kHz while AF or TA is on. The selected FM tuning step will appear in the display.

Note

• The tuning step remains at 50 kHz during manual tuning.

28

ENGLISH

Page 27 Page 29
Image 28
Page 27 Page 29
Contents DEH-P4800MP To register your productContents Connecting the Units Ignition switch 12 V DC ON/OFF Blue/white Type of vehicle, never connect 6 *Installation DIN Front/Rear-mountDIN Front-mount DIN Rear-mountFix the front panel to the unit using fixing screws Fixing the front panelBefore You Start About this unitFeatures About this manualCase of trouble About WMAProtecting your unit from theft What’s WhatHead unit Removing the front panelOptional remote control Power ON/OFFTurning the unit on Selecting a sourceTuner Listening to the radioIntroduction of advanced tuner operation Storing and recalling broadcast frequenciesStoring the strongest broadcast frequencies Tuning in strong signalsIntroduction of RDS operation Selecting alternative frequencies Switching the RDS displayReceiving traffic announcements Receiving PTY alarm broadcasts PTY listBuilt-in CD Player Playing a CDIntroduction of advanced built-in CD player operation Repeating playPausing CD playback Using compression and BMXPlaying tracks in random order Scanning tracks of a CDUsing disc title functions Using CD Text functionsFolder number indicator WMA indicatorMP3 indicator MP3/WMA/WAV PlayerPausing MP3/WMA/WAV playback Scanning folders and tracksPress 4 or 6 to select the repeat range Select the repeat rangeSearching every 10 tracks in the current folder When playing back an MP3/WMA discDisplaying text information on MP3/WMA/WAV disc When playing back a WAV disc Disc number indicatorScrolling text information in the display Multi-CD PlayerIntroduction of advanced multi-CD player operation Disc multi-CD playerScanning CDs and tracks Using ITS playlists Creating a playlist with ITS programmingPlayback from your ITS playlist Erasing a track from your ITS playlistErasing a CD from your ITS playlist Audio Adjustments Using compression and bass emphasisIntroduction of audio adjustments Using balance adjustment Using the equalizerAdjusting equalizer curves Recalling equalizer curvesUsing subwoofer output Adjusting loudnessFine-adjusting equalizer curve Using the high pass filter Adjusting subwoofer settingsBoosting the bass Front image enhancer F.I.EAdjusting source levels Initial SettingsAdjusting initial settings Setting the FM tuning stepSwitching Auto PI Seek Switching the auxiliary settingSetting the rear output and subwoofer controller Saving the battery consumptionUsing the AUX source Other FunctionsUnderstanding built-in CD player error messages Additional InformationSound muting CD player and careMP3 additional information MP3, WMA and WAV filesWMA additional information About folders and MP3/WMA/WAV files TermsSpecifications Page GB-P4800MP-DEH-MAN
Top Page Image Contents