Pioneer P4800MP Ignition switch 12 V DC ON/OFF Blue/white, Type of vehicle, never connect 6

MAN-DEH-P4800MP-GB.fm Page 4 Thursday, September 29, 2005 11:55 AM

Connecting the Units

Note							Connecting cords with RCA pin
							plugs (sold separately)		Power amp
Depending on the kind of vehicle, the function of 3*
and 5* may be different. In this case, be sure to								(sold separately)
connect 2* to 5* and 4* to 3*.			This product	Front output
			Subwoofer output or		AUX jack (3.5 ø)			Power amp
			Rear output					(sold separately)
			Antenna jack	Fuse (10 A)	Jack for Wired Remote Control
								Note
					Please see the Instruction Manual
	Connect leads of the same							Use a stereo mini plug
					for the Wired Remote Control (sold
	color to each other.							cable to connect with
					separately).
								auxiliary equipment.
					IP-BUS input
Cap (1*)
					(Blue)	Mult-CD player
When not using this						(sold separately)
terminal, do not remove					IP-BUS cable
the cap.
Yellow (3*)		Yellow (2*)			Blue/white
Back-up (or accessory)		To terminal always supplied with			To system control terminal of the
		power regardless of ignition switch			power amp (max. 300 mA 12 V DC).
		position.						System remote control
					Blue/white (7*)
					To Auto-antenna relay control
Red (5*)		Red (4*)			terminal (max. 300 mA 12 V DC).
Accessory (or back-up)		To electric terminal controlled by					The pin position of the ISO connector will differ
		ignition switch (12 V DC) ON/OFF.			Blue/white (6*)
							depends on the type of vehicle. Connect 6* and 7*
							when Pin 5 is an antenna control type. In another
							type of vehicle, never connect 6* and 7*.
		Black (ground)
		To vehicle (metal) body.				Front speaker		Front speaker
						Left		Right
						Subwoofer or		Subwoofer or
						Rear speaker		Rear speaker
ISO connector					Speaker leads
			Yellow/black		White:	Front left +		Perform these connections when
Note					White/black:	Front left -		using the optional amplifier.
			If you use a cellular telephone, connect it via
In some vehicles, the ISO connector may be					Gray:	Front right +
			the Audio Mute lead on the cellular telephone.
divided into two. In this case, be sure to					Gray/black:	Front right -		Note
			If not, keep the Audio Mute lead free of any
connect to both connectors.					Green:	Rear left + or Subwoofer +		Change the initial setting of this unit (refer
			connections.
					Green/black:	Rear left - or Subwoofer -		to the Operation Manual). The subwoofer
					Violet:	Rear right + or Subwoofer +		output of this unit is monaural.
					Violet/black:	Rear right - or Subwoofer -

4

ENGLISH