MP3/WMA/WAV Player
Playing MP3/WMA/WAV
These are the basic steps necessary to play an MP3/WMA/WAV with your
Track number indicator
Shows the track (file) currently playing.
Folder number indicator
Shows the number of folder currently playing.
Play time indicator
Shows the elapsed playing time of the current track (file).
WMA indicator
Shows when a WMA file is playing.
MP3 indicator
Shows when an MP3 file is playing.
1.Insert a
• You can eject a
• To avoid a malfunction, make sure that no metal object comes into contact with the terminals when the front panel is open.
2.Use VOLUME to adjust the sound level. Rotate it to increase or decrease the volume.
3.Press 8 or 2 to select a folder.
• You cannot select a folder that does not have an MP3/WMA/WAV file recorded in it.
• To return to folder 01 (ROOT), press and hold BAND. However, if folder 01 (ROOT) contains no files, playback commences with folder 02.
4.To perform fast forward or reverse, press and hold 4 or 6.
• This is fast forward and reverse operation only for the file being played.
• If you select ROUGH, pressing and holding 4 or 6 enables you to search every 10 tracks in the current folder. (Refer to “Selecting the search method” on page 19.)
5.To skip back or forward to another track, press 4 or 6.
Pressing 6 skips to the start of the next track. Pressing 4 once skips to the start of the current track. Pressing again will skip to the previous track.
Notes
•When playing discs with MP3/WMA/WAV files and audio data
•If you have switched between playback of MP3/WMA/WAV files and audio data
•The
•Do not insert anything other than a CD into the CD loading slot.
•There is sometimes a delay between starting up CD playback and the sound being issued. When being read, FORMAT READ is displayed.
•If you cannot insert a disc completely or if after you insert a disc the disc does not play, check that the label side of the disc is up. Press EJECT to eject the disc, and check the disc for damage before inserting it again.
•Playback is carried out in order of file number. Folders are skipped if they contain no files. (If folder 01 (ROOT) contains no files, playback commences with folder 02.)
•When playing back files recorded as VBR (variable bit rate) files, the play time will not be correctly displayed if fast forward or reverse operations are used.
•If the inserted disc contains no files that can be played back, NO AUDIO is displayed.
•If the inserted disc contains WMA files that are protected by digital rights management (DRM), SKIPPED is displayed while the protected file is skipped.
•If all the files on the inserted disc are secured by DRM, PROTECT is displayed.
•There is no sound on fast forward or reverse.
•If an error message such as
•When an MP3/WMA/WAV disc is inserted, folder name and file name begin to scroll to the left automatically.
Introduction of advanced
Function display
Shows the function status.
RPT indicator
Shows when repeat range is selected to current track (file).
*Press FUNCTION to display the function names.
Press FUNCTION repeatedly to switch between the following functions:
RPT (repeat play) – RDM (random play) – SCAN (scan play) – PAUSE (pause) – COMP (compression and BMX) – FF/REV (search method)
• To return to the playback display, press BAND.
Note
•If you do not operate the function within about 30 seconds, the display is automatically returned to the playback display.
ENGLISH
17