Selecting a Source
When the Pioneer Navigation unit is combined, you can select the images of each source.
• Select the desired source.
AV I N 1
Each press of the SOURCE/POWER button selects the desired source in the following order:
[AV IN1] = [AV IN2] = [NAVI SOURCE] = Exit to [AV IN1]
Note:
•[NAVI SOURCE] indicates the Pioneer Navigation unit with
•[AV IN1] and [AV IN2] are audio and video from the AV equipment connected to the AV IN1 or AV IN2 input terminal. (Refer to page 26.)
•Verify the correct connection with the AV equipment connected to AV IN1 or AV IN2.
•AV IN2 is selectable only if either [ON] or
•Pressing the NAVI/AV button will switch between navigation images (Navigation Map) or the images of each source.
•When showing navigation images (Navigation Map), only the
ENGLISH ESPAÑOL DEUTSCH FRANÇAIS ITALIANO NEDERLANDS
10