Pioneer AVD-W6210 owner manual Before Installing and Fixing, Before Affixing the Adhesive Tape

Installation

•Use of this product is subject to any government laws regarding placement or use.

PIONEER does not accept any liability for any problems, damage or loss incurred as a result of the product being used with an incorrect setting or in violation of any government laws.

•To ensure proper installation, use the supplied parts in the manner specified. If any parts other than the supplied ones are used, they may damage internal parts of the unit or they may work loose and the unit may come off.

•To ensure safe driving, be sure to install the display in a position that meets the following conditions.

*Where it does not obstruct the driver’s vision and impede the safe operation of the vehicle.

*Where the front of the car is within the driver’s field of vision when look- ing at the display.

*Where the display does not protrude above the front of the hood as viewed by the driver.

Before Installing and Fixing

•Make temporary connections first to check that the unit and system are working properly.

•Press the RESET button with the tip of a ball-point pen or similar object, when a con- nection is completed. (Refer to page 7.)

•Concerning display installation using a bracket and screws (4 ⋅ 6, 2 pcs), please contact your dealer or the nearest authorized Pioneer service facility.

Before Affixing the Adhesive Tape

•Make sure the surface is free of moisture, dust, grime, oil, etc. before affixing the tape.

31