Connecting the System
Connecting ”REVERSE-GEAR SIGNAL INPUT“ Lead
When using this product with a
Connect the
Connection method
Power cable
Clamp the reversing lamp lead.
(Refer to page 25.)
Clamp firmly with needle- nosed pliers.
Violet/White
Of the two lead wires connected to the back lamp, connect the one in which the voltage changes when the gear shift is in the REVERSE (R) position.
Fuse resistor
Check the position of your vehiche’s reversing lamp (the one that lights up when the gear shift is in REVERSE [R]) and find the reversing lamp lead in the trunk.
Note:
•When you have completed lead wire connection, perform the appropriate settings for the connection method.
(Refer to page 17.)
CAUTION
Reversing lamp lead
This function is designed for use with a
29