SUPPLIED PARTS | SWITCHING ON/OFF |
Supplied parts
The signal controller is supplied with all the parts listed below. Please check that the range of parts supplied with your device is complete. If one of the listed parts is missing, please contact your dealer immediately.
Switching on/off
Switching on the signal controller
The signal controller is switched on via the “+12V ignition” switching line by the connected control device.
●Signal controller 7 607 003 551
●Connecting cable
●Screws
●IR remote control
●IR receiver
●Operating and installation instruc- tions
Switching off the signal controller
The signal controller is switched off via the “+12V ignition” switching line by the connected control device.Switching on/ off.
12