Blaupunkt IVSC-5502 installation instructions Installation Specifications

Page 8

INSTALLATION

SPECIFICATIONS

made to the vehicle, please contact a specialist workshop in your area.

Note:

You cannot display PAL video on the wide vision TV monitor using the RGB input.

In this case, the PAL video signal must be connected directly to the AV input of the wide vision TV monitor..

Specifications

Video input:

Composite Video, 1.0 Vpp, 75 ohms

Audio input:

0 - 1.0 Vrms, 20 Hz-20 kHz (Booster off)

0 - 0.3 Vrms, 20 Hz-20 kHz (Booster on)

RGB input (video signal): 0.7 VPP, 75 ohms

RGB input (composite-sync): 0.7 VPP, 75 ohms

Video output:

Composite video, 1.0 Vp-p, 75 ohms

Audio output:

0 - 1.0 Vrms, 20 Hz - 20 kHz

RGB output (video signal): 0.7 VPP, 75 ohms

RGB output (composite-sync): 1.0 VPP, 75 ohms

Power supply:

DC 12V, +/- 10%, max. 5A

Operating temperature:

-20°to +70° Celsius

Dimensions:

205 x 45 x 146 mm (W x H x D)

16

Image 8
Contents IVSC-5502 Contents Installation and safety notices AccessoriesGeneral Information General informationSupplied Parts Switching ON/OFF Switching on/offSwitching on the signal controller Switching off the signal controllerSettings SettingsIR remote control External monitor switch FigIR Remote Control Settings for Audio OUTInstallation InstallationInstallation Specifications SpecificationsFeatures Monitor outputs+12V Ignition +12V Permanent 1 Batterie, battery Masse / GND Front Left Right Overhead 9002/1024 Ivmr 5802/6502 Ivms Blaupunkt GmbH