FlipScreen Owner’s Manual
5.If your network requires a WEP key, select the Security button, then:
a.Select the appropriate security options.
b.Enter the WEP key.
c.Choose OK.
6.If you use a static IP address, select the IP button, then:
a.Clear the Use DHCP (Auto) checkbox.
b.Enter static IP address, subnet mask, gateway router and DNS servers.
c.Choose OK.
7.Choose the Connect button.
•If the connection is successful, the Options dialog closes.
•If the connection is not successful, the Options dialog remains open so you can resolve the issue.
Some networks are set up to allow only specific devices to connect based on the device’s MAC (Media Access Control) address. You can quickly find the MAC (Media Access Control) address (also known as the physical address) of your wireless card.
To find a card’s MAC address
1.From the Internet Options menu, select Connection Settings.
2.Select the Wireless Settings button.
3.Select the IP button.
The MAC Address of the wireless card is displayed. Write it down so you can enter it when configuring your router for the iCEBOX.
Configuring a Dial-Up Connection
If you have inserted a modem card, you can enter the information required to dial up to your ISP and log in.
Note: The iCEBOX does not currently support any ISPs that require downloading or installing software. At the time of the printing of this manual, AOL is an example of an ISP that will not work with the iCEBOX because of their download requirements, although you can still retrieve AOL mail using the iCEBOX Internet browser.
To configure a Dial-Up connection
1.In Internet Mode, press Options.
2.From the Internet Options menu, select the Connection Settings button.
3.Enter the appropriate information in the User Name, Password, Dialing Prefix (if any), and ISP Phone # fields.
4.Select whether you want an audible Dialing Sound.
5.Enter a Disconnect time limit.
6.Choose OK.
36