Barco MFGD 3220 D user manual Portrait or landscape position

Page 10

4Pull the red strap out of the fixation holes in the foot.

You can better leave the cover off the foot while connecting the signal cables to the display.

2.3 Portrait or landscape position

You can change the orientation of the panel at any time, but it is more convenient to select landscape or portrait orientation before connecting the cables.

To change the panel orientation:

1Stand at the front side of the panel and take the panel at both sides.

2Very important: Tilt the panel before changing the orientation.

Should you change the panel orientation without tilting it first, you might irreversibly damage the tilt & swivel mechanism.

3To change from portrait to landscape, turn the panel counterclockwise while lifting it up slightly.

To change from landscape to portrait, turn clockwise.

MFGD 3220D User's Guide

11

Page 9 Page 11
Image 10
Page 9 Page 11
Contents Mfgd 3220 D Safety Instructions Mfgd 3220D Users Guide Contents Mfgd 3220D Users Guide Introduction Overview2048 x 1536 or 1536 x 2048 at 60 Hz Package contents Controls and connectorsPage Before installing the display InstallationPrecautions To remove the strapPortrait or landscape position Connecting the signals To connect the video & sync signalsRouting the signal cables Starting up Tilt and swivel positioningProceed as follows Controls Stand-by switchingBrightness control Cabinet MaintenancePanel Removing dust from the rear of the glass panelTroubleshooting Pixel FaultsTechnical Specifications Power consumption Input connectorsPower source Safety standards
Top Page Image Contents