Barco MFGD 3220 D user manual

Page 8

(1)Power LED

-The LED is off when the display is off.

-The LED is green when the display is on. Note: This function can be switched off by software.

-The LED is blinking green when the display is in Suspend power-saving mode.

-The LED is orange when the display is in Stand-by power-saving mode.

(2)Control wheel for stand-by switching and luminance control

(3)USB-downstream connector

(4)USB-upstream connector

(5)DVI (video and data) input

(6)12V DC power input

Image 8

Contents Mfgd 3220 D Safety Instructions Mfgd 3220D Users Guide Contents Mfgd 3220D Users Guide 2048 x 1536 or 1536 x 2048 at 60 Hz OverviewIntroduction Package contents Controls and connectorsPage Installation PrecautionsBefore installing the display To remove the strapPortrait or landscape position Connecting the signals To connect the video & sync signalsRouting the signal cables Proceed as follows Tilt and swivel positioningStarting up Brightness control Stand-by switchingControls Maintenance PanelCabinet Removing dust from the rear of the glass panelTroubleshooting Pixel FaultsTechnical Specifications Input connectors Power sourcePower consumption Safety standards