2. INSTALLATION
2.1 Precautions
•Keep your original packaging. It is designed for this display and is the ideal protection during transport.
•Avoid reflections in the flat panel to reduce eye strain.
•Place the display on a strong and stable table or desk.
•Keep the display away from heat sources and provide enough ventilation in case it is built in a rack or console.
•Make sure the computer is switched off before connecting the signals.
•Do not block or cover the openings in the external power supply block. Also, do not turn the power supply upside down or at its side. Doing so would cause overheating of the power supply.
2.2.Before installing the display
Important:
In the factory, the
Before installing the display, you must remove this strap.
To remove the strap:
1Position the display with its rear side facing you.
2If the foot cover is mounted on the foot, lift up the 2 clips of the foot cover to release the cover from the foot.
3Pull the lower side of the cover towards you and simultaneously slide the cover downward.
MFGD 3220D User's Guide | 10 |