Barco MFGD 3220 D user manual Controls, Stand-by switching, Brightness control

Page 14

3.CONTROLS

The control wheel (2) at the bottom (landscape orientation) or at the side (portrait orientation) allows you to perform some controls. You can switch the display in stand-by and control the brightness.

3.1 Stand-by switching

When the display is on, depress the control wheel slightly to switch the display in stand-by.

When the display is in stand-by, depress the control wheel slightly to turn it back on.

3.2 Brightness control

Turn the control wheel (2) clockwise to increase the brightness.

Turn the control wheel (2) counterclockwise to decrease the brightness.

The Brightness control can be disabled using the

MediCal Pro software.

(2)

MFGD 3220D User's Guide

15

Page 13 Page 15
Image 14
Page 13 Page 15
Contents Mfgd 3220 D Safety Instructions Mfgd 3220D Users Guide Contents Mfgd 3220D Users Guide 2048 x 1536 or 1536 x 2048 at 60 Hz OverviewIntroduction Package contents Controls and connectorsPage Before installing the display InstallationPrecautions To remove the strapPortrait or landscape position Connecting the signals To connect the video & sync signalsRouting the signal cables Proceed as follows Tilt and swivel positioningStarting up Brightness control Stand-by switchingControls Cabinet MaintenancePanel Removing dust from the rear of the glass panelTroubleshooting Pixel FaultsTechnical Specifications Power consumption Input connectorsPower source Safety standards
Top Page Image Contents