Barco MFGD 3220 D user manual Safety Instructions

Page 2

SAFETY INSTRUCTIONS

Read the safety and operating instructions before operating the apparatus.

Retain safety and operating instructions for future reference.

Adhere to all warnings on the apparatus and in the operating instructions manual.

Follow all instructions for operation and use.

•This apparatus conforms to:

CE, IEC 60950, UL 60950, CAN/ CSA C22.2 No. 60950 (cUL)

• FCC notice

This equipment has been tested and found to comply with the limits of a class A digital device, pursuant to Part 15 of the FCC rules. These limits are designed to

provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications.

Operation of this equipment in a residential area is likely

to cause harmful interference in which case the user will be required to correct the interference at his own expense.

Power connection

Warning: This apparatus must be earthed!

Power requirements: The apparatus must be powered using the 12 VDC power supply that is supplied with the apparatus.

The 12 VDC power supply must be powered by the AC mains voltage.

Do not overload wall outlets and extension cords as this may result in fire or electric shock.

Mains lead protection (U.S.: Power cord): Supply cords should be routed so that they are not likely to be walked upon or pinched by items placed upon or against them, paying particular attention to cords at plugs and receptacles.

Water and moisture

Never expose the apparatus to rain or moisture.

Never use the apparatus near water - e.g. near a

bathtub, washbasin, swimming pool, kitchen sink, laundry tub or in a wet basement.

Ventilation

Do not cover or block the ventilation openings in the cover of the set. When installing the apparatus in a cupboard or another closed location, heed the necessary space between the set and the sides of the cupboard.

Installation

Place the apparatus on a flat, solid and stable surface that can bear the weight of at least 3 displays. If you use an unstable cart or stand, the set may fall, causing serious injury to a child or adult, and serious damage to the equipment.

Image 2
Contents Mfgd 3220 D Safety Instructions Mfgd 3220D Users Guide Contents Mfgd 3220D Users Guide 2048 x 1536 or 1536 x 2048 at 60 Hz OverviewIntroduction Package contents Controls and connectorsPage Before installing the display InstallationPrecautions To remove the strapPortrait or landscape position Connecting the signals To connect the video & sync signalsRouting the signal cables Proceed as follows Tilt and swivel positioningStarting up Brightness control Stand-by switchingControls Cabinet MaintenancePanel Removing dust from the rear of the glass panelTroubleshooting Pixel FaultsTechnical Specifications Power consumption Input connectorsPower source Safety standards