
DVD Operations
5FUNCTION MENU
Tap button access into the Function Menu, and there are have below options for selection:
Repeat
Repeat “CH” to repeat playback the current the chapter.
Repeat “Title” to repeat playback the current title.
Repeat “ Off ” to cancel all the Repeat function.
Disc Audio
During playback to change the audio language (DVD/Divx only).
Video Setting
Top button access into the Video Setting mode, the below Setup menu will appear:
Change the Bright level from 01 to 10.
Change the Contrast level from 01 to 10.
Change the Color level from 01 to 10.
Reset to default setting
Close the Setting menu
DVD Setup
Under the DVD Setup mode, there are have below options for selection:
Aspect Ratio: Selecting the TV Aspect setting allows the user to select the aspect ratio of the TV (DVD and VCD only). The following options are available:
4:3 = Aspect ratio of TV is 4:3. 16:9=Aspect ratio of TV is 16:9. Both wide
screen and 4:3 contents will fill the entire screen.
TV Signal: The Video setting allows the user to select the TV standard (DVD and VCD only). The following options are available:
NTSC = TV is NTSC. PAL content is played at NTSC resolution and frame rate (factory default).
PAL = TV is PAL. NTSC content is played at PAL resolution and rame rate.
AUTO = If the content is PAL, the output is PAL. If the content is NTSC, the output is NTSC.
Default
Setting the Default on will reset all options of Media function setting to factory defaults setting.
6INFORMATION
Tap button to view the Disc information of the unit.
7VIDEO SETUP
Tap button to quickly enter into the video setup mode.