Dual Zone Operation

This unit is equipped with the most advance “Dual Zone” feature. This function is useful if the user would like to select different modes of the Audio and Video output source for Front and Rear Speakers and TFT Screens. For example, user can select to listen to Tuner music for front speakers and rear speaker for DVD movie.

To Switch On Dual Zone Mode

1. “Off” is the default setting.

2. Under SETUP menu, tap button

access into the Dual Zone mode, and then

tap select to 2-Zone on.

The Available Playback Mode

1.Front Zone: Tuner and BT modes are available select for playback on Front Zone.

2.Rear Zone: Tuner , Media (Disc/USB/SD), AV modes are available select for playback Rear Zone.

NOTE

AV-1 & AV 2 are considered as the same mode/source in the DUAL ZONE function. So if either the Front or Rear Source is set to AV-1 or AV-2 mode, The other ZONE is not allowed to select the AV-2 or AV-1 Mode eg: If F-Zone is selected “AV-1”, then R-Zone is not allow to have ”AV-2”.

To Operates Function of Front / Rear Soures

1.The Front Panel & Remote control, is defaulted to control the FRONT source's function / operation.

2.When DUAL ZONE is turned “On”, the Source button is used to change Front source & Rear source. Press the Source button repeatedly to change between Front and Rear.

3.The TFT screen will display the Rear Source mode. User can to make the desired operation on the Rear Source's function on the Front Panel or Remote Control.

4.The TFT screen will automatically switch back to the Front Source after 10 seconds. And the Front Panel buttons and Remote now is resumed to operate for Front Source's function again.

The Default Setting When Dual Zone is “On”

1.The default source / mode for Front ZONE is Tuner & for Rear ZONE is “DVD”.

2.The default Volume level is “12” for both Front & Rear ZONE audio output. (or the Volume Level set as VOL PGM Level set in the Menu).

3.The TFT screen is defaulted to display the Front Mode.

4.When Dual Zone is “On”, some of the AUDIO FUNCTION, EQ FUNCTION and

SOURCE WILL NOT BE FUNCTIONAL.

To Switch Off Dual Zone Mode

Under SETUP menu, tap button

access into the Dual Zone mode, and tap button select to 2-Zone off.

The Default Setting When Dual Zone Is In “off” Mode

The default audio output reverts to what the user selected for the FRONT Zone source when DUAL ZONE IS “OFF”. For example: When the DUAL Zone is “ON “, user has selected DVD for Front ZONE & Tuner for Rear ZONE. Once DUAL ZONE is turned “OFF”, Audio Output for all 4 speakers becomes “DVD” mode.