Bluetooth Operations
Handsfree Operation
Pairing, Connecting And Deleting With A Bluetooth Device
When connecting Bluetooth devices at the first time with this unit, a mutual registration is required, this is called “Pairing”. This registration (Pairing) is required only at the first time, as this unit and the other devices will recognize each other automatically from the next time.
After the devices are registered (Paired) with this unit. User can select the registered device and connect it, this is called “Connecting”.
TIPS
This unit can Pair up to 8 devices with Handsfree and / or Audio Devices.
If the pairing Bluetooth device has both HFP (Handsfree Profile) and A2DP (Advance Audio Distribution Profile). This unit will automatically pairing these two profiles at the same time.
3.When searching is completed, the detected device name(s) will be displayed in a list.
4.Tap the device name you want to be connected/paired with the selected device in the list.
5.Password input: user can input minimum 1 & up to maximum 4 of any numeric number between 0 to 9, as the password for this unit.
6.Tap 
button on display to confirm the password input, and the Pairing process
should start.
7.“BT70” should appear on the pairing device, user should select & accept pair with “BT70” and then input the same password which was input on this unit previously on above step 6.
NOTE
Please refer to the instruction manual of the Bluetooth device on how to enter into the Bluetooth set up and Bluetooth pairing.
8.If the pairing is successful, the below display will be show on TFT:
Searching available Bluetooth Devices for Pairing “from this unit”.
1.Access into the SETUP MENU, and touch
to activate the Pairing procedure.
NOTE
Please see SETUP MENU Operation for more details of how to access into Bluetooth Menu – Pairing mode.
If the pairing failed, the below display will be show on TFT for 3 seconds:
2. Tap | to activate the searching |
pairing device mode. | |
|
|
|
|
|
|
NOTE |
|
| and the unit will automatically switch back to | ||
Please make sure to check the pairing |
|
| |||
|
| the previous mode. | |||
Bluetooth device, make sure the |
|
| |||
|
|
|
|
| |
Bluetooth mode is turned ON and the |
|
|
| NOTE | |
“VISIBILITY” is set to “SHOW”. |
|
| During Pairing, only the Volume & Mute | ||
Stored image may differ from the original |
|
| buttons are functional, all the other | ||
aspect ratio due to compression or |
|
| function keys are disabled & | ||
elongation. |
|
| during the pairing mode. | ||
|
|
|
|
|
|
| E - 25 | ||||