Tap | button to confirmed the |
selection to delete.
3.If the delete is successful, the below display will be show on the TFT:
INCOMING CALL
Answering An Incoming Call
1.When there is an incoming call, the below display will be show on TFT:
4. To end the conversation, tap 
button. The unit will switch back to the previous mode automatically and release the mute of the previous mode at the same time.
NOTE
An Incoming call under stand by mode (Ignition on & Power Off), the system will automatically switch on the head unit.
Rejecting An Incoming Call
User can tap | button to reject the |
incoming call. |
|
NOTE
The audio output of the present mode will be muted and the ringing tones will be heard if an incoming call is not being answered. After tapping the 
button, the mute of the present mode will be released.
2. If the incoming call has no caller I.D. number,
the display will show UNKNOW. user can
tap the | button to answer / |
accept the call.
NOTE
The audio output of the present mode will be muted and the ringing tone will be heard if an incoming call is not being answered.
3.User can use the Volume Up / Down to adjust the volume level.
OUTGOING CALL
Making An Outgoing Call
1.User can tap 
button on display enter into the dial and make an outgoing call.
NOTE
User also can use his/her Mobile Phone to dial and make an outgoing call.
E - 27