English Owner’s manual
VISUAL Operations
●Lock system monitor image and sound
|
|
| 2 ZONE |
|
|
|
|
|
|
| |
| Front monitor lock | Rear monitor | 3 ZONE | ||
(∗1) | Visual 2 connection |
| Visual 2 connection | ||
| |||||
| lock |
| |||
| [OTHERS] |
| [NAVI] |
| |
|
|
|
| ||
|
|
|
|
|
|
Front image | Image of device |
| Image of device | Displays image of | Image of device |
(receiver | connected to the |
| connected to the | mode selected | connected to the |
screen) | Visual 2 terminal |
| Visual 2 terminal | using the [FUNC] | Visual 2 terminal |
| (∗3) |
|
| button | (∗3) |
|
|
|
|
|
|
Rear monitor | Image of device |
| Displays image of | Image of device connected to the | |
image | connected to the |
| mode selected | Visual 1 terminal |
|
(separately | Visual 2 terminal |
| using the [FUNC] |
|
|
sold) | (∗3) |
| button (∗2) |
|
|
|
|
|
|
|
|
Vehicle speaker | Plays sound of mode selected using the [FUNC] button |
| |||
sound |
|
|
|
|
|
|
|
|
|
|
|
∗1 A device connected to the Visual 2 terminal should be set up as described in the section “Switch- ing Connect.”
∗2 No image is displayed on the rear monitor when a
∗3 For safety reasons, this image is not displayed when the vehicle is moving. The picture can be watched only when the vehicle is standing still and the parking brake is engaged.
2-ZONE: 1 (front monitor lock)
1.Press the [M.L] button.
2.Press the [FUNC] button to select the de- sired mode.
3.To cancel the monitor lock, press the [M.L] button.
The screen shows the image of the selected mode.
∗When the front monitor lock is engaged,
[MENU], [LIST], [KEY PAD], [ADJ] and
2-ZONE: 2 (rear monitor lock)
1.Press the [ADJ] button to display the AD- JUST MODE menu.
2.Touch the [REAR MONI LOCK] key and the [ON] key.
3.Touch the [RTN] key or press the [ADJ] but- ton.
4.To cancel the monitor lock, press [ADJ] but- ton, touch the [REAR MONI LOCK] key and the [OFF] key.
5.Touch the [RTN] key or press the [ADJ] but- ton.
The monitor lock is now canceled.
Locking the front monitor and rear monitor (3-ZONE)
1.Lock the rear monitor by performing the in- structions in steps 1 to 3 above.
2.Press the [M.L] button to lock the front moni- tor.
3.Press the [FUNC] button.
The image for the selected mode is dis- played for about 5 seconds after which the front monitor lock image is displayed.
4.To cancel the monitor lock, press the [M.L] button.
5.To cancel the rear monitor lock, press the
[ADJ] button, touch the [REAR MONI LOCK] key and the [OFF] key.
44 VRX925VD