English
TV Operations
Seek tuning | Manual tuning |
Owner’s manual
1.Press the [BAND] button and select the desired TV band (TV1 or TV2).
∗If “MANU” is lit in the display, press and hold the [BAND] button for 1 second or longer. “MANU” in the display goes off and seek tuning is now available.
2.Press the [d] or [a] button to automatically seek a station. Press the [d] button to automatically tune up the frequency band to the next available TV station; press the [a] button to automatically tune down.
∗When the panel is open, the same operation is also available by using the [a] or [d] button in the panel.
Selecting stations with the KEY PAD
∗This function displays the KEY PAD on the screen enabling you to tune in through auto store, preset scan or by entering a frequency.
Press the [KEY PAD] button to display the KEY PAD.
There are 2 ways available: Quick tuning and step tuning. When you are in the step tuning mode, the frequency changes one step at a time. In quick tuning mode, you can quickly tune the desired frequency.
1.Press the [BAND] button and select the desired band. (TV1 or TV2)
∗If “MANU” is not lit in the display, press and hold the [BAND] button for 1 second or longer. “MANU” appears in the display and manual tuning is now available.
2.Tune into a station.
●Quick tuning:
Press and hold the [d] or [a] button for 1 second or longer to tune in a station.
●Step tuning:
Press the [d] or [abutton to manually tune in a station.
Note:
•Manual tuning is cancelled if you do not operate the unit for 7 seconds longer. (∗Only when connecting the TTX7503Z or TTX7504Z with this unit)
●Tuning in by selecting a frequency
1.Touch the [SRCH] key to switch the KEY PAD.
2.Touch the [0]~[9] key corresponding with the frequency you desired. When you touch the wrong number ([0]~[9] key), you can cancel that to touch the [DEL] key.
3.Touch the [ENT] key. The radio station you required would be tuned.
●To use auto store,
touch the [AS] key for about 2 seconds.
●To perform a preset scan,
touch the [PS] key.
●To cancel the KEY PAD display,
press the [KEY PAD] button or touch the [OFF] key.
Recalling a preset station
A total of 12 TV stations can be stored
There are 2 ways available to recall the preset station.
●Using the [DIRECT] buton.
1.Press the [BAND] button and select the desired TV band. (TV1 or TV2)
2.To recall a stored TV station, press the desired [DIRECT] button to select that station.
∗Press and hold one of the [DIRECT] buttons for 2 seconds or longer to store the current station into the preset memory.
●Using the [DIRECT] key.
1.Press the [LIST] button or touch the screen when the STANDARD screen is displayed, then touch the [P.CH SELECT] key.
2.Touch the corresponding [DIRECT] key to recall the stored station.
∗You can select the desired band to touch the [BAND] key.
3.Touch the [RTN] key or press the [LIST] button to return to the previous mode.
50 VRX925VD