DVD Changer Operations
This function allows you to control a connected DVD changer in the same way as described in DVD player Operation.
For details on operations other than those described below, see DVD player Operation. For details on DVD changer precautions, refer to the supplied owner’s manual.
Selecting a disc
When the panel is closed :
Each of the [DIRECT] button corresponds to a disc loaded into the DVD changer.
Press the [DIRECT] button (1 to 6) and select the desired disc.
When the panel is open :
Press the [LIST] button, otherwise press the [DISC SEL] button on the remote control unit.
Touch the [DIRECT] key (1 to 6) in the display or press the numeric button for the disc number (1 to 6) on the remote control unit to select the desired disc.
Switching to a next disc. (Disc Up function)
The disc up function plays from the first track (track No.1) of the next disc.
Press the [BAND] button.
Each time you press the [BAND] button, the disc changes to the next disc.
Disc Repeat playback
This operation plays back all tracks on the disc repeatedly.
There are 3 ways available :
•Press the [KEY PAD] button and touch the [D.RPT] key.
•Touch the screen and touch the [SUB MODE] key. Touch the [DISC REPEAT] key then touch the [RTN] key.
•Press the [RPT] button on the remote control unit 1 second or longer.
∗To cancel the disc repeat play, touch the [D.RPT]/ [DISC REPEAT] key or press the [RPT] button on the remote control unit.
TV Operations
TV functions
When an optional TV tuner is connected through the CeNET cable, this unit controls all TV tuner functions. To watch TV requires a TV tuner.
WARNING
For your safety, the driver should not watch the TV or operate the controls while driving. Please note that watching and operating the TV while driving are prohibited by law in some countries.
Watching TV
Notes:
•For your safety, the VRX925VD has a safety function which turns off the picture when the car is moving, so only the audio can be heard. The picture can only be watched when the car is stopped and the parking break is applied.
1.Press the [FUNC] button and select the TV mode.
2.Press the [BAND] button to select the desired TV band (TV1 or TV2). Each time the button is pressed, the input selection toggles between TV1 and TV2.
3.Press the [d] or [a] button to tune in the desired TV station.
∗When the panel is open, the same operation is also available by using the [a] and [d] button in the panel.
Watching a video
The TV tuner has a VTR input terminal to which 1 external device can be connected. Connect a 12V video cassette player (VCP) or video cassette recorder (VCR) to the TV tuner input terminal.
1.Touch the screen or press the [LIST] button, the MENU screen appears.
2.Touch the [EXTRA SELECT] key in the MENU screen to select the [VTR] key.
3.To return to the TV broadcast, touch the screen again and touch the [EXTRA SELECT] key in the MENU screen to select the [TELEVISION] key.
English Owner’s manual
VRX925VD 49