JVC KD-ADV49 manual Sound, Disc Surround*3

ENGLISH

Sound

Menu items	Selectable settings, [reference page]
Fader/Balance	Adjust fader—speaker output balance between the front and rear speakers.
Adjusts fader	•	Upmost—front only
	•	Downmost—rear only
	When using a two-speaker system, set the fader to the center (00).
Adjust balance	Adjust balance—speaker output balance between the left and right speakers.
	•	Leftmost—left only
	•	Rightmost—right only
Volume Adjust	Adjust and store auto-adjustment volume level for each source, comparing to
	the FM volume level. The volume level will automatically increase or decrease
	when you change the source.
	–12to +12; Initial 00
	• For digital sources: You can make the adjustments separately depending on
		the audio format—Dolby Digital/DTS and the others.
Subwoofer Level*1	Adjust the subwoofer output level.
	–06to +08; Initial 00
High Pass Filter	Through: Select when the subwoofer is not connected.
	On: Select when the subwoofer is connected.
Crossover	Adjust the crossover frequency between the front/rear speakers and the
	subwoofer.
	80Hz, 120Hz, 150Hz
Amplifier Gain	You can change the maximum volume level of this unit.
	Off: Deactivates the built-in amplifier.
	Low Power: Select this if the maximum power of the speakers is less than
	50 W.
	High Power
Rear Speaker*2	You can activate/deactivate the rear speakers.
	Off, On

Disc Surround*3

Menu items	Selectable settings, [reference page]
Surround Off	Select to deactivate the surround function.
Surround On	Select to activate the surround function. ￿[23]
	Auto, Through, Dolby PLII Movie, Dolby PLII Music
	• When you select <Dolby PLIIMusic>, you can adjust <Panorama> and
	<Center Width>.*4

58