USB |
| Bluetooth operations |
ENGLISH
•If “No USB device“ appears after removing a device, reattach a device or select another playback source.
•When the USB device has no playable files, or has not been formatted correctly, “Cannot play this device Check the device” appears on the monitor.
•The unit cannot recognize a USB device whose rating is other than 5 V and exceeds 500 mA.
•While playing from a USB device, the playback order may differ from other players.
•This unit may be unable to play back some USB devices or some files due to their characteristics or recording conditions.
•USB devices equipped with special functions such as data security functions cannot be used with the unit.
•Do not use a USB device with 2 or more partitions.
•Depending on the shape of the USB devices and connection ports, some USB devices may not be attached properly or the connection might be loose.
•When connecting a USB device, refer also to its instructions.
•Connect only one USB device to the unit at a time. Do not use a USB hub.
•This unit may not recognize a USB device connected through a USB card reader.
•When connecting with a USB cable, use the USB 2.0 cable.
•This unit may not play back files in a USB device properly when using a USB extension cord.
•This unit cannot assure proper functions or supply power to all types of the devices.
•This unit can recognize a total of 5 000 files and 250 folders (a maximum of 999 files per folder).
•This unit can recognize a total of 25 characters for file/folder names.
•For MPEG1/2 files: The maximum bit rate for video signals (average) is 2 Mbps.
General
•While driving, do not perform complicated operation such as dialing the numbers, using phone book, etc. When you perform these operations, stop your car in a safe place.
•Some Bluetooth devices may not be connected to this unit depending on the Bluetooth version of the device.
•This unit may not work for some Bluetooth devices.
•Connecting condition may vary depending on circumstances around you.
•When the unit is turned off, the device is disconnected.
Warning messages for Bluetooth operations
Connection Error:
The device is registered but the connection has failed. Use <Phone Connect>/<Audio Connect> to connect the device again. (page 32)
Error:
Try the operation again. If “Error” appears again, check if the device supports the function you have tried.
Please Wait...:
The unit is preparing to use the Bluetooth function. If the message does not disappear, turn off and turn on the unit, then connect the device again (or reset the unit).
64