VM9411
TV TUNER OPERATION
Accessing TV Mode
To switch to TV mode, press the SRC button (15) on the front panel or on the remote control (8) until TV appears at the bottom of the screen.
Seek Tuning
Press the >> button (19) on remote control, or the > button on the joystick (17) to seek the next available TV station by increasing the tuning frequency.
Press the << button (17) on the remote control, or the < button on the joystick (16) to seek the next available TV station by decreasing the tuning frequency.
Once a TV station is searched, the auto seeking stops and the TV station is played. If no station is searched, the tuning stops at the first channel after performing a round search.
Storing Stations (AS)
Auto Memory Tuning
To select the strong stations in the current TV frequency range, press and hold the joystick button (20) to activate the Auto Store function. The new stations replace stations already stored. Press the joystick button again or press the
/BAND button (18) on the remote control to stop searching.
Selecting a TV Station
To browse through stored stations:
•Press the >> button (14) on the remote control or the /\ button (18) on the joystick to tune to the next stored station.
•Press the << button (22) on remote control or the V button (19) on the joystick to tune to the previous stored station.
Direct Channel Selection
Use the numeric keypad on the remote control (29) to enter a specific TV station.
Display Current Channel
Press the INFO button (10) on the remote control to display information regarding the current TV station.
27