Jensen VM9411 instruction manual Monitor Movement Mechanism, Monitor Protective Measures

VM9411

Monitor Movement Mechanism

If an obstruction occurs in the monitor path, the following protective measurements can be executed to prevent damage to the mechanism or monitor:

Table 4: Monitor Protective Measures

Obstruction	Self	OPEN Button	Power
	Protection	Pressed	Reconnected
Monitor load-	Monitor is auto-	Monitor fully	Monitor is auto-
ing out hori-	matically	extended hori-	matically
zontally	loaded into unit	zontally	loaded into unit
Monitor load-	Unit stops at	Monitor fully	Monitor is auto-
ing in hori-	obstruction	extended hori-	matically
zontally	point	zontally	loaded into unit
Monitor load-	Unit stops at	Monitor swiv-	Monitor swiv-
ing out verti-	obstruction	els back to the	els back to the
cally	point	unit	unit
Monitor load-	Unit stops at	Monitor swiv-	Monitor swiv-
ing in verti-	obstruction	els back to the	els back to the
cally	point	unit	unit

After the protective procedure is executed, normal operation is resumed by pressing the OPEN button (1) or disconnecting and reconnecting the power.

14