Sears 153333030, 153333100, 153333131, 153333531 Water Piping, Searsinstallation KIT Shutoff

Page 10

Water Piping

WARNING

HOTTER WATER CAN SCALD: Water heaters are

intended to produce hot water. Water heated to a tem- perature whmchwill satisfy clothes washing, dish wash- ing, and other sanitizing nei_dscan scaldand perma- nently inlure you upon contact. Some people are more likely to be permanently injured by hot water than oth- ers. These include the elderly, children, the infirm, or physically/mentally handicapped, if anyone uslng hot water in your home fits into one of these groups or if

there is a local code or state law requiring a certain temperature water at the hot water tap, then you must take special precautions. In addition to using the low- est possible temperature setting that satisfies your hot water needs, some type of tempering device, such as a mixing valve, should he used at the hot water taps used by these people or at the water heater. Mixing valves

are available at plumbing supply or hardware stores. Follow manufacturers instructions for installation of

the valves. Before changing the factory setting on the

thermostat, read the "Temperature Regulation" section in this manual.

-WARNING

This water heater shall not be connected to any heat- ing systems or component(s) now or previously used wlth a non-potable water heating appliance.

WARNING o

Toxic chemicals such as used for treatment of boilers

or non-potable water heating appliances shall never be introduced into a potable water heating system.

If a water heater is installed in a Closed water supply sys- tem; such as one having a back-flow preventer, check valve, water meter with a check valve, etc..., in the cold water supply; means shall be provided to control thermal

expansion. Contact the local utility or local Sears Service Center on how to control this situation.

NOTE: To protect a_ainst untimely corrosion of hot and cold water fittings, zt is strongly recommended that di- electric unions or couplings 5e installed on this water heater when connected to copper pipe,

The illustration shows the attachment of the water piping to the water heater, The water heater is equipped with ¾ inch water connections,

NOTE: If using copper tubing, solder tubing to an adapter before attachJ_ngthe adaptor to the colit water inlet connection. Do not solder the cold water supply line directly to the cold water inlet. It will harm the dip tube and damage the tank.

14Look at the top cover of the water heater..The water outlet is marked hot. Put two or three turns of teflon tape around the threaded end of the threaded-to-sweat coupling and around both ends of the ¥_" threaded nip- ple, Using flexible connectors, connect the hot water pipe to the hot water outlet on the water heater°

2" Look at the top cover of the water heater. The cold water inlet is marked coid_ Put two or three turns of

teflon tape around the threaded end of the threaded-

to-sweat coupling and around both ends of the ¥4" threaded nipple_ Using flexible connectors, connect

the cold water pipe to the cold water inlet of the water heater.

NOTE: This water heater is insulated to minimize heat loss from the tank. Further reduction in heat loss can

be accomplished by insulating the hot water lines from the water heater.

INSTALLATION COMPLETED

USING

SEARSINSTALLATION KIT

SHUTOFF

FLEXIBLEWATER

 

VALVE

CONN

 

 

HOT OUTLET

 

COLD INLET

TO HOUSE

 

WATER LINE

THRFADED TO

 

 

SWEAT COUPLING

THREADED TO

 

SWEAT COUPLING

NIPPLE

 

NIPPLE

COLD

 

 

It_VALVE

10

Image 10
Contents Save this Manual for Future Reference Whatto do if YOU Smell GASDEATH, Serious Bodily INJURY, or MODEl- NumbersThis may reducethe changesof flammablevaporsfrom a floor Before Lighting Propane L,RGAS Water HEATER5Pound-persquare inch 35kPa Thiswaterheatermust not be installed directly on carpetingWater damagein connection with this water heater General Height to Tank TypeMinimum CapacityYou may or may not need all of these tools, depending on OTurn ItOFF the gas supply to the water heater Facts to Consider About the Location This water heater must not be installed directly on carpetMinimum clearances between the water heater and com Allair from Inside Buildings Searsinstallation KIT Shutoff Water PipingTemperature-Pressure Relief Valve Charge capacity of the valveTion, explosionor asphyxiation Sears Service Center or gas utility for further informationFilling the Water Heater Lslopeupwardto thechimneyat least1,inchper linear footInstallation Checklist Model Rating PlateGAS Piping with ALL Black Iron Pipe To GAS Control Sediment TrapGround JOINTi For Your SAFETYFigure Before Lighting Propane LP. GAS WaterControlsystemand any gas controlwhichhas been underwater Somegasis heavierthanair andwillsetUeon thefloorWhatto Doif Yousmellgas Not ForceHotterwatercan SCALDWater heatersare intended to SMOKE/ODOR Operational ConditionsCondensation Strange SoundsAIR in HOT Water Faucets High Temperature Shut OFF SystemNot Enough or no HOT Water Burner Inspection Burner CleaningVenting System Inspection HousekeepingTemperature-Pressure Relief Tank Sediment €leaningPage Page 17 i 0270118 KEYT53.333031 153.333100 #40 #41HA153.333131 40 Gal 53333530 50 Ga 153.333531 50 Gal #38 Model NumbersPart Numbers 153o333131 40 GaL 153.333530 50 Gal 153.333531 50 GaLAbout Your Warranty Sears Installation Policy Sears Installation Warranty

153333030, 153333100, 153333130, 153333531, 153333000 specifications

Sears has long been a staple in the retail industry, and its product line reflects a commitment to quality and innovation. The following details highlight the main features, technologies, and characteristics of five specific model numbers: 153333530, 153333131, 153333031, 153333000, and 153333531.

The Sears model 153333530 is designed with durability and functionality in mind. One of its standout features is an ergonomically designed handle that provides a comfortable grip, making it user-friendly for extended periods of use. This model also incorporates advanced safety mechanisms, ensuring a secure operation that minimizes the risk of accidents.

Meanwhile, the 153333131 model offers versatility and efficiency. It comes equipped with multiple settings that allow users to customize their experience according to their specific needs. This adaptability is further enhanced by its smart technology, which can optimize performance based on the task at hand, providing a seamless user experience.

The 153333031 model aims to combine power with convenience. It boasts a robust motor that delivers impressive performance for various tasks. This model is further characterized by its lightweight design, which makes it easy to maneuver, especially in tight spaces. Additionally, it includes an energy-efficient feature that helps reduce power consumption without compromising on effectiveness.

With the model 153333000, Sears emphasizes portability and compactness. This unit is specifically designed for users who require a product that is easy to transport. Its folding mechanism allows for efficient storage, making it perfect for those with limited space. The model also incorporates modern technology, such as Bluetooth connectivity, enabling users to control it remotely through a smartphone application.

Lastly, the Sears 153333531 model stands out due to its environmentally friendly design. This model utilizes sustainable materials that reduce its carbon footprint while maintaining high quality and reliability. Its advanced filtration system not only enhances performance but also contributes to a healthier home environment.

In summary, these Sears models showcase diverse features and technologies aimed at enhancing user convenience, safety, and performance. By focusing on ergonomics, versatility, power, portability, and sustainability, Sears continues to meet the evolving needs of consumers while also championing innovation in the retail space.