Planar PS4652/PS5552/PS6552 Network connection, Connecting the display to a local area network

Page 23

Network connection

21

Network connection

Connecting the display to a local area network

To set the display to connect to a local area network (LAN):

1.Connect a RJ45 cable to the corresponding ports on the display and your LAN switch or router.

2.Open the OSD menu. Go to Setting > Control Setting and select LAN.

3.Go to Setting > Network Settings and perform either of the following settings according to your network environment. You may need to contact your network administrator for assistance on these settings.

-If you are in a DHCP environment (the IP address of the display will be automatically assigned by a DHCP server), select DHCP > Execute and press the ENTER button on the remote control. Once the display is successfully connected, the IP Address, Subnet Mask, Default Gateway, Primary DNS, and Secondary DNS information will be displayed.

-If you are not in a DHCP environment (the IP address of the display has to be configured manually), select Manual > Execute and press the ENTER button on the remote control. Contact your network administrator for information on the IP Address, Subnet Mask, Default Gateway, Primary DNS, and Secondary DNS settings and enter them accordingly.

4.To save the settings and return to the previous menu, highlight Execute and press the ENTER button on the remote control.

Image 23
Contents USER’S Guide PS4652/PS5552/PS6552Important Recycle Instruction Revision Control Table of Contents Troubleshooting Safety warnings and precautions Important safety instructions Important safety instructionsBattery safety notice Safety notice for remote controlPackage contents Mounting the display Setting up the displayInstalling the display on a wall Name Description Parts of the display and their functionsRear panel Connects to a DisplayPort compatible device Reception from the remote controlInput/output terminals PlayerRJ45 USB Type aConnects to a USB flash drive USB Mini BNumeric button 0/MUTE Remote controlVOL- / / VOL+ Numeric 1-9/Input source buttonsRefit the battery compartment cover Using the remote controlInstalling remote control batteries Remote control usage tipsConnection Connecting audio/video signalsConnecting the VGA input ConnectionConnecting the YPbPr component video input Connecting the DVI-D digital input Connecting the Hdmi digital input Connecting the DisplayPort DP digital input Connecting multiple displays Connecting power Turning the display on or off Switching input signalsAdjusting audio volume level Basic operationsNetwork connection Connecting the display to a local area networkNetwork connection Information Remote network controlScreen Picture & SoundSchedule SettingMail Report Configuring mail server settingsStatus Status reportAlert report thermal error Alert report voltage error Network RS232 commands over the network Function Picture Mode Backlight Contrast BrightnessOSD menu overview OSD On-Screen Display menuOSD On-Screen Display menu PS4652/PS5552 PS6552 Using the control panelOperations in the OSD menu OperationMove Picture menuAudio Source DisplayPort Reset Resets all settings in the Sound menuSound menu BalanceScreen menu Native Original Full Wide ZoomZoom Full Sources are connected Setting menuSettings EnterSet Monitor Viewing multimedia contents Supported file formats Viewing filesViewing files in the display’s built-in memory Viewing files on an external USB storage deviceOffice Viewer Directional arrows for selecting a desired photo Opens the selected photoBack Returns to the previous No Icon DescriptionMoves the highlight bar up/down to select a file Goes back to the mainGoes back to the previous Plays selected video fileGoes to the next video file Hides the control user interface when the video is playingPlays/pauses the video Goes to the previous video fileGoes to the next video Displays the playback controls panelGoes to the previous video Opens the selected audio file Rewinds the audio Plays/pauses the audioPlays the previous audio file Plays the next audio fileOpens the selected file Goes to the next Closes the documentView Moves to the left/rightSystem SettingsSlideshow mode Language Sets a preferred language for the OSD menuProduct information SpecificationsSpecifications Page Unit mm DimensionsPS4652 Product information PS5552 Product information PS6552 Hex code Remote control codesYPbPr Supported Blank not supported Port Multi Media Supported PAP input signal combinationMain/Left picture signal source YPbPr DisplayProblem Solution Troubleshooting