Planar PS4652/PS5552/PS6552 manual RS232 commands over the network

Page 32

30 Network connection

RS232 commands over the network

The PS-Series also supports extending access to the RS232 commands over a network connection. Below are the steps to follow for controlling the display over LAN through the RJ45 connector.

1.Connect display & PC to hub or connect display to PC with LAN cable directly.

2.Set display IP address. (See "Connecting the display to a local area network" on page 21)

3.Commands are sent via TCP connection to port 4660. The commands are the same as for the RS232 port (see PS-Series RS232 manual on www.planar.com).

4.You can test commands using any TCP utility program that allows you to enter binary data in hexadecimal format. (Note: Contact Planar Technical Support for recommended programs.)

Image 32

Contents PS4652/PS5552/PS6552 USER’S GuideImportant Recycle Instruction Revision Control Table of Contents Troubleshooting Safety warnings and precautions Important safety instructions Important safety instructionsSafety notice for remote control Battery safety noticePackage contents Mounting the display Setting up the displayInstalling the display on a wall Name Description Parts of the display and their functionsRear panel Reception from the remote control Input/output terminalsPlayer Connects to a DisplayPort compatible deviceUSB Type a Connects to a USB flash driveUSB Mini B RJ45Remote control VOL- / / VOL+Numeric 1-9/Input source buttons Numeric button 0/MUTEUsing the remote control Installing remote control batteriesRemote control usage tips Refit the battery compartment coverConnecting audio/video signals Connecting the VGA inputConnection ConnectionConnecting the YPbPr component video input Connecting the DVI-D digital input Connecting the Hdmi digital input Connecting the DisplayPort DP digital input Connecting multiple displays Connecting power Switching input signals Adjusting audio volume levelBasic operations Turning the display on or offNetwork connection Connecting the display to a local area networkNetwork connection Remote network control InformationPicture & Sound ScreenSetting ScheduleConfiguring mail server settings Mail ReportStatus report StatusAlert report thermal error Alert report voltage error Network RS232 commands over the network Picture Mode Backlight Contrast Brightness OSD menu overviewOSD On-Screen Display menu FunctionOSD On-Screen Display menu Using the control panel Operations in the OSD menuOperation PS4652/PS5552 PS6552Picture menu MoveReset Resets all settings in the Sound menu Sound menuBalance Audio Source DisplayPortScreen menu Native Original Full Wide ZoomZoom Full Setting menu SettingsEnter Sources are connectedSet Monitor Viewing multimedia contents Viewing files Viewing files in the display’s built-in memoryViewing files on an external USB storage device Supported file formatsOffice Viewer Opens the selected photo Directional arrows for selecting a desired photoNo Icon Description Back Returns to the previousGoes back to the main Goes back to the previousPlays selected video file Moves the highlight bar up/down to select a fileHides the control user interface when the video is playing Plays/pauses the videoGoes to the previous video file Goes to the next video fileGoes to the next video Displays the playback controls panelGoes to the previous video Opens the selected audio file Plays/pauses the audio Plays the previous audio filePlays the next audio file Rewinds the audioOpens the selected file Closes the document ViewMoves to the left/right Goes to the nextSettings Slideshow modeLanguage Sets a preferred language for the OSD menu SystemProduct information SpecificationsSpecifications Page Unit mm DimensionsPS4652 Product information PS5552 Product information PS6552 Remote control codes Hex codeYPbPr Supported Blank not supported Supported PAP input signal combination Main/Left picture signal source YPbPrDisplay Port Multi MediaTroubleshooting Problem Solution