Planar PS4652/PS5552/PS6552 manual Set Monitor

	The OSD (On-Screen Display) menu	39
Set Monitor	Assigns an ID number for the current display when multiple displays are connected.
	Note:
ID
	• For use under the RS-232C control mode.
	Uses the HDMI CEC (Consumer Electronics Control) industry standard protocol to share
HDMI Control	functionality between connected devices and the display. To transfer system
	commands, you need to use an HDMI cable to connect the display to a device equipped
	with HDMI CEC. Select On in this menu and you can operate the main functionalities on
	your display and the connected device with one remote control.
	• Auto Search: Automatically detects available input sources.
	• Auto Adjustment: Automatically optimizes image display for the VGA input.
	• Overscan: Turns the overscan function on or off.
	• RGB Signal: Sets the type of signal for a piece of video equipment or PC connected to
	the HDMI of the display.
	- If the color space of the input signal is YCbCr, the input range will be fixed as
	16~235 regardless of your selection of PC or Video.
	- If the color space of the input signal is RGB, the input range will be set to 0~255 if
	you select PC, and 16~235 if you select Video.
	Note:
Advanced	• This function is only available when the input source is HDMI at the following resolutions:
	- 480p60 (640x480@60)
	- 576p50
	- 720p50/60 (1280x720@60)
	- 1080p50/60 (1920x1080@60)
	• Image Retention: Automatically displays swift moving patterns to prevent image
	retention on the screen.
	• OSD Rotation: Changes the OSD orientation.
	Note:
	• See product specifications for models recommended for portrait orientation. Landscape only
	models operated in portrait mode may result in premature failure and will not be covered
	under the warranty.
	• OSD Info Box: When turned On, switching signal inputs, or changing timing, the
	display will show the current input source and resolution onscreen. Select Off to show
	the information box onscreen only when you press INFO on the remote control.
	• Adaptive Contrast: Turns the Adaptive Contrast function on or off. This feature
Advanced	enhances image contrast for dark scenes.
	Note:
	• This feature is not available if the Ambient Light Sensor function is set to On.
	• Ambient Light Sensor: When turned On, the image brightness will change
	automatically as the ambient lighting conditions change.
	Displays the following information of your display.
	• Date
	• Model Name
Information	• Serial Number
	• Operating Time
	• Software Version
	• LAN Version
	• IP Address
All Reset	Returns all settings to factory default values.