Planar PS4652/PS5552/PS6552 manual Screen menu

36 The OSD (On-Screen Display) menu

Screen menu

Screen

PAP Setting
Display Wall
Aspect	Full
Adjust Screen
Freeze	Off

	:Move	ENTER :Enter	EXIT :Exit
Item		Description
	• PAP: Turns on or off the PIP (Picture in Picture) and PBP (Picture by Picture)
	functions.
	• Active Picture: For the PIP, selects the main or sub picture to operate. For the
	PBP, selects the left or right picture to operate. Swaps the main/ sub or left/right
PAP Setting	pictures.
	• Picture Size: Changes the size of the sub picture.
(Picture and Picture)
	• Picture Position: (PIP only) Changes the position of the sub picture.

Notes:

•PAP is not available for all signal source combinations. See "Supported PAP input signal combination" on page 61 for more information on supported combinations.

•In PAP mode, only sound from the active picture will be available.

•H. Monitors/V. Monitors: Sets the number of displays used in the horizontal/ vertical direction.

•H. Position/V. Position: Sets the horizontal/vertical position of the display wall matrix.

Display Wall	• Frame Comp.: Adjusts images near the display edges for optimal demonstration
	across the display wall.
	• LED: Turns the power indicator on the display on or off.
	• Power On Delay: Choose to enable or disable a sequence in turning on the
	screen matrix. If enabled, the display will turn on with a maximum of 10-second
	delay.
	Sets the picture’s aspect ratio.
Aspect	• Wide Zoom: Enlarges to fill screen with minimum distortion.
	• Zoom: Enlarges the picture, keeping the same aspect ratio.