Planar EP6504K/EP6504K-T, EP5804K/EP5804K-T manual Safety Information, Safety Precautions

Page 8

Safety Information

Safety Information

Before using the Planar EP-Series, please read this manual thoroughly to help protect against damage to property, and to ensure personnel safety.

Be sure to observe the following instructions.

For your safety, be sure to observe ALL the warnings detailed in this manual.

For installation or adjustment, please follow this manual’s instructions, and refer all servicing to qualified service personnel.

Safety Precautions

If water is spilled or objects are dropped inside the display, remove the power plug from the outlet immediately. Failure to do so may result in fire or electrical shock. Contact your dealer for inspection.

If the display is dropped or the chassis is damaged, remove the power plug from the outlet immediately. Failure to do so may result in fire or electrical shock. Contact your dealer for inspection.

WARNING! Wall mounts must be secure.

If the display is hung on a wall, the wall must be strong enough to hold it. Simply mounting it to wallboard or wall paneling won’t be adequate or safe.

Caution: The screen could be damaged by heavy pressure.

Slight pressure on the LCD will cause distortion of the image. Heavier pressure will cause permanent damage. Displays should be mounted where viewers cannot touch the screen or insert small objects in the openings that will create hazards by contacting bare conductive parts.

Caution: The front polarizer is soft and subject to scratches from sharp objects.

The polarizer is a thin sheet of film laminated to the outside layer of glass on the LCD screen. Take care when handling items near the screen.

If the power cord or plug is damaged or becomes hot, turn off the main power switch of the display. Make sure the power plug has cooled down and remove the power plug from the outlet. If the display is still used in this condition, it may cause a fire or an electrical shock. Contact your dealer for a replacement.

2

EP5804K, EP5804K-T, EP6504K and EP6504K-T User Manual

Image 8
Contents EP5804K/EP5804K-T, EP6504K/EP6504K-T User Guide Disclaimer Warranty and Service Plans RoHS Compliance StatementTrademark Credits Table of Contents TCP Mode, UDP Mode and Uart Accessing Planar’s Technical Support Website Table of Contents Introduction Safety Information Safety PrecautionsImportant Safety Instructions Burn-In Versus Temporary Image Retention What is Temporary Image Retention?Recommended Usage European Union Disposal Information Cooling Requirements Vesa Mounts, General DescriptionNormal Usage Guidelines Cleaning the Display Package Contents Description Quantity Contents of the Accessory Kit Part Installing the Cable Clips Dimensions EP5804KEP5804K T EP6504K EP6504K T Planar EP Series Standard Inputs DVI VGAInstalling the Display Before You BeginInstalling OPS Expansion Optional Operating the Display OSD KeypadOSD Keypad Buttons Key DescriptionsRemote Control Receiver LED Indicators Using the Display in Portrait ModeLED On ConditionUsing the Remote Control Num Function Customer Hex Code Description SourceLocking/Unlocking the OSD Menus Function Customer Hex Code DescriptionChanging the Remote Control Battery Turning the Display OnAdjusting the Volume Turning the Display OffSelecting the Input Source OSD Menu Functions Mode3840x VideoMenu Video Description Setting Mode Menu, Adjust the image Position for VGA input 3840x Menu VideoDNS DVI Main Menu Submenu Description Setting Image Settings Display Settings OSD MenusAudio Settings Basic Settings RTC Submenus Advanced Settings Network Settings Navigating Through the Menus Multi-Display Control System StatusImage Settings Menu Scheme Brightness Contrast Sharpness Saturation HueRange 128~383 Range -50~50 Display Settings Menu Local DimmingAspect Ratio Zoom Auto Scan Select Source Range 0~10 Range On, OffAudio Settings Menu Range -6~6Basic Settings Menu Range 0~15Options On, Off Options 5~120Power LED Real Time Clock Splash Screen Real Time Timer Mode Basic Menu/RTC Real Time Clock MenuRTC Timer Mode User Timer Mode User modeRTC Timer Mode Work Days Timer Mode Work Days modeRTC Timer Mode All Days Timer Mode All Days modeAdvanced Settings Menu Auto Adjustment Image Position Phase Clocks VGA ADC SettingsIrfm OptionsDisplayPort Mode Factory Reset Options No, Yes Advanced Settings Ethernet Setup SubmenuEnable Network Dynamic IP Static IP Address Subnet Mask Shows the unique address assigned to network interfaces Advanced Settings User ADC Calibration Advanced Settings Menu Options Yes, No Advanced Settings Multi-Display Control SubmenuMonitor ID Video Wall Power On Delay Frame Matrix Matrix Y Division Division Y Advanced Settings Edid Setup DisplayPortSystem Status Menu Function Action Using the Touch ScreenPerforming basic functions Quickly drag your finger flick in a desired direction Touchscreen MultiTouch Driver Installation Touchscreen PQLabs MultiTouch Platform ContentUninstalling the MultiTouch Driver Multi-Touch FunctionsLAN Control Supported Operating SystemsInstallation Installation Installation Configuring Vcom Create a Remove an Virtual Search By IP Function DescriptionsSearch Configure IP Address WebAdding a Virtual COM Port Removing a COM Port Setting Up Email Alerts LoginLogin System IP Configuration AdministratorAuthentication Configuration Load Default Setting Firmware Update and Boot Loader Upgrade TCP Mode, UDP Mode and Uart SmtpReset Device FH KHz FV Hz Signal CompatibilityTiming Timing KHzfH HzfV VesaSpecifications Model SpecificationAudio Input Humidity Troubleshooting Issue Check for the followingAccessing Planar’s Technical Support Website Index OPS expansion slot installation Iii