NAD L 70 Using the L70’S DVD/VCD/CD, Press OPEN/CLOSE the Disc Tray Opens, About DVD/SVCD/VCD/CD

Page 16

ENGLISH FRANÇAIS DEUTSCH NEDERLANDS ESPAÑOL ITALIANO PORTUGUÊS SVENSKA

Operation

USING THE L70’S DVD/VCD/CD

When you want to play back DVD videodiscs, turn on the TV and select the L70’s DVD player. When you want to enjoy the sound of DVD videodiscs, VCDs, or audio CDs from the L70, press the “SURROUND MODE” button on the L70 and select the desired surround mode of the L70’s DVD player.

The HTR L70 Device Selector key “DVD” will enable the transport keys beneath the HTR L70 navigation keys. The source selector knob “INPUT SELECTOR” on the L70 can also select DVD as well. If the L70 is in standby mode, the “OPEN/CLOSE” button will also automatically select DVD mode.

Set the playback picture size according to the aspect ratio of the connected TV in the “SETUP”

OSD menus.

PRESS “OPEN/CLOSE”; THE DISC TRAY OPENS.

•You can open the disc tray by pressing this button even if the L70 is in standby mode. The power indicator will turn from blue to dark. Place a disc on the disc tray with the playback side down.

•There are two different disc sizes. Place the disc in the correct guide on the disc tray. If the disc is out of the guide, it may damage the disc and cause the L70 to malfunction.

•Press “PLAY/PAUSE”, the disc tray is automatically closed and playback begins.

•If the disc is placed in upside down (and it is a single sided disc), ‘NO DISC’ appears on both the L70’s display and the TV/monitor screen.

•If you insert an audio VCD/CD, the total tracks and time will appear.

•If you insert a SVCD videodisc, the PBC symbol will appear in the L70’s display.

•After playing back all of the chapters in the title, L70’s DVD player automatically stops and returns to the menu screen.

Press the navigation keys then and press “ENTER”, or press the numeric button(s), to select the desired item. Play of the selected item now begins.

For further information, also refer to the jacket or case of the disc you are playing.

NOTES

•Do not move the L70 during playback. Doing so may damage the disc and the L70.

•Do not push the disc tray while it is moving. Doing so may cause the L70 to malfunction.

•Do not push up the disc tray or put any objects other than discs on the disc tray. Doing so may cause the L70 to malfunction.

•Keep your fingers well clear of the disc tray as it is closing. Be especially careful with children’s fingers around the closing disc tray, as there is a risk of personal injury.

•Depending on the DVD disc, some operations may be different or restricted. Refer to the jacket or case of the disc you are playing.

•Do not change the position of the OSD SELECT switch on the back of the L70 when it is turned on. Doing so may result in poor picture quality.

ABOUT DVD/SVCD/VCD/CD

The L70’s internal DVD/SVCD/VCD/CD player will play DVDs, SVCD with or without PBC (Play Back

Control), VCDs, and CDs including CD-R, CD-RW, and MP3.

NOTE

You cannot playback discs other than those listed above such as Video CD-CD-ROM, CD-Extra, CD-G, photo-CD, and CD-i data discs. To do so may render the L70 permanently inoperable.

REGION MANAGEMENT INFORMATION

This DVD Player is designed and manufactured to respond to the Region Management Information that is recorded on a DVD disc. If the Region number described on the DVD disc does not correspond to the Region number of this DVD player, this DVD player cannot play that disc.

NOTE

There are two regions for the L70, Region 1 and Region 2 as shown on the back of the L70.

16

Page 15 Page 17
Image 16
Page 15 Page 17
Contents DVD Receiver Safety Precautions IntroductionThis Product to Rain or Moisture Record Your Model Number NOW, While YOU can see ITTable of Contents Getting the Most from the NAD L70 About the HTR L70 System Remote Control Ease of USEUpgradability QuickstartIdentification of controls Front PanelJacks of the VCR Rear Panel Español Italiano Português SvenskaImportant Note Setup Setting UP the L70Getting Started Dealing with HUM and NoiseSetting L70 OSD Language Receiver Section only Input SetupDisplaying the L70 RECEIVER’S OSD Navigating the OSD and Making ChangesInput Selector Speaker Configuration Setting Speaker ConfigurationSurround Mode Level Trim Test SetupDelay Time Setting Level TrimSetting Speaker Delay Time Using the L70 Adjusting the VolumeOperation Selecting SourcesUsing the L70’S DVD/VCD/CD Press OPEN/CLOSE the Disc Tray OpensAbout DVD/SVCD/VCD/CD Region Management InformationDisc Language Settings OSD OSD NavigationVideo OSD TV DisplayPassword DefaultsSystem OSD OSD LanguageUsing the L70’S AM/FM Radio Choosing the FM Mute / Mode About RDSViewing RDS Text About User NamesAbout the L70’S Surround Modes EarsEnhanced Stereo StereoDolby Digital / DTS Selecting Surround ModesAdjusting Surround Modes DTS Delay TimeDolby Digital Delay Time Enhanced Stereo / Ears Delay TimeAdjusting Level Trim on the FLY To Adjust Level TrimAdjusting the Tone Controls About the 12 V Trigger OUTSpecifications Using the HTR L70 Remote ControlControlling the L70 Cancel Operation Learning Codes from Other RemotesExample Learning VCR Pause PUNCH-THROUGHCopy a Command from Another KEY Macro CommandsKey Recording MacrosKEY-ILLUMINATION Timeout Factory ResetDelete Mode Executing MacrosSearch Mode Loading CODE-LIBRARIESChecking CODE-LIBRARY Number Mode Keys To Press for 3 secondsSummary of HTR L70 Modes Troubleshooting ReferenceSpecifications Physical SpecificationsAmplifier Section Tuner SectionReference L70 Manual 03/05 China
Top Page Image Contents