NAD L 70 Ease of USE, Upgradability, About the HTR L70 System Remote Control, Quickstart

Page 5

Introduction

GETTING THE MOST FROM THE NAD L70

EASE OF USE

Despite the effort NAD has invested in the L70 receiver’s sonic performance, we expended no less in making it powerfully easy to use. Its design is uniquely simple for so sophisticated a component, and the HTR L70 universal remote control is equally understandable, as are the L70’s own front-panel and on- screen displays (OSD).

UPGRADABILITY

The L70 receiver permits flexible system growth via individually accessible 5.1 channel input for connectivity to products with integrated surround decoders.

See “Rear Panel (5.1 CH. INPUT)”.

ABOUT THE HTR L70 SYSTEM REMOTE CONTROL

Packed with your L70 is the NAD HTR L70 remote control, a full-system remote especially designed to be easy to use and easy to understand. Be sure to read the section “Using the HTR L70 Remote Control,” to familiarize yourself with the remote’s layout and operations before proceeding to setup your receiver.

Chances are, you will want to use your HTR L70 as your primary way to command your entire A/V system. The HTR L70 can be employed to operate additional NAD or other-brand components such as a second DVD/CD player, television, satellite/HDTV tuner, VCR, or virtually anything else that operates via standard infrared remote control.

QUICKSTART

In case you simply cannot wait to experience the performance of your new NAD L70 DVD/Receiver, we provide the following “Quickstart” instructions to get you underway. The steps below connect your L70 to a TV/monitor; be sure to read “Input Setup”.

PLAY A DVD MOVIE

•Connect the L70’s composite video or S-Video “MONITOR OUT” jack to your TV/monitor’s corresponding input.

•Depending on the selection above, switch the “OSD SELECTOR” switch to either S-Video or Composite position (found on the back of the L70 beside the Composite Output “MONITOR” jack.

•Connect your left and right front speakers to the L70’s “FRONT L and R” outputs, being sure to connect red to red (“+”) and black to black (“-”), with care to avoid stray wires or strands crossing between terminals. (Connect centre and surround speakers as well, if you like). If your system includes a powered subwoofer, connect the L70’s “SUBWOOFER PRE-OUT” jack to its line input.

•Plug the AC mains plug into the AC; the LED on the front panel will be lit blue indicating the L70 is in standby mode ready to accept commands from either the front panel power switch or the HTR L70 remote.

•To start playback of the DVD player; press the HTR L70 remote’s “DVD” Device Selector key, and then

its transport key “Open/Close” to select the DVD, insert the media and press the transport play key to start playing. You should hear multichannel or stereo sound, and see an image on the TV/monitor. (If one or the other fails to appear, you may need to use either the L70’s Receiver or DVD on-screen menu systems to check assignment of audio and video inputs; see “Input Setup”.)

Enjoy the movie or music, but be sure to set aside time to read this manual thoroughly, and to set up, calibrate, and configure your L70 carefully and completely.

SVENSKA PORTUGUÊS ITALIANO ESPAÑOL NEDERLANDS DEUTSCH FRANÇAIS ENGLISH

5

Page 4 Page 6
Image 5
Page 4 Page 6
Contents DVD Receiver Introduction Safety PrecautionsThis Product to Rain or Moisture Record Your Model Number NOW, While YOU can see ITTable of Contents Getting the Most from the NAD L70 Ease of USE About the HTR L70 System Remote ControlUpgradability QuickstartFront Panel Identification of controlsJacks of the VCR Español Italiano Português Svenska Rear PanelImportant Note Setting UP the L70 SetupGetting Started Dealing with HUM and NoiseInput Setup Setting L70 OSD Language Receiver Section onlyDisplaying the L70 RECEIVER’S OSD Navigating the OSD and Making ChangesInput Selector Setting Speaker Configuration Speaker ConfigurationSurround Mode Level Trim Test SetupSetting Speaker Delay Time Setting Level TrimDelay Time Adjusting the Volume Using the L70Operation Selecting SourcesPress OPEN/CLOSE the Disc Tray Opens Using the L70’S DVD/VCD/CDAbout DVD/SVCD/VCD/CD Region Management InformationOSD Navigation Disc Language Settings OSDVideo OSD TV DisplayDefaults PasswordSystem OSD OSD LanguageUsing the L70’S AM/FM Radio About RDS Choosing the FM Mute / ModeViewing RDS Text About User NamesEars About the L70’S Surround ModesEnhanced Stereo StereoSelecting Surround Modes Dolby Digital / DTSDTS Delay Time Adjusting Surround ModesDolby Digital Delay Time Enhanced Stereo / Ears Delay TimeTo Adjust Level Trim Adjusting Level Trim on the FLYAdjusting the Tone Controls About the 12 V Trigger OUTControlling the L70 Using the HTR L70 Remote ControlSpecifications Learning Codes from Other Remotes Cancel OperationExample Learning VCR Pause PUNCH-THROUGHMacro Commands Copy a Command from Another KEYKey Recording MacrosFactory Reset KEY-ILLUMINATION TimeoutDelete Mode Executing MacrosLoading CODE-LIBRARIES Search ModeSummary of HTR L70 Modes Mode Keys To Press for 3 secondsChecking CODE-LIBRARY Number Reference TroubleshootingPhysical Specifications SpecificationsAmplifier Section Tuner SectionReference L70 Manual 03/05 China
Top Page Image Contents