NAD L 70 Adjusting Level Trim on the FLY, To Adjust Level Trim, Adjusting the Tone Controls

Page 24

ENGLISH FRANÇAIS DEUTSCH NEDERLANDS ESPAÑOL ITALIANO PORTUGUÊS SVENSKA

Operation

ABOUT THE L70’S SURROUND MODES

ADJUSTING LEVEL TRIM “ON THE FLY”

You can make changes to the relative levels of centre, surround, and subwoofer outputs. This may prove useful in a number of circumstances; for example, to increase (or tone down) a film’s dialog level by raising (lowering) the centre channel, or to reduce excessive deep bass (or enhance deep bass) by lowering (raising) the subwoofer level without having to go into the LEVEL TRIM OSD menu.

TO ADJUST LEVEL TRIM

Use the HTR L70 remote’s “SURR”, “CENTER”, and “SUB” keys for direct-access level adjustment of these channels, over a range of ±10 dB. You can also adjust all channel levels using the front panel’s navigation keys (see “Front Panel,” above), or via the <LEVEL TRIM> line of the OSD’s <MAIN MENU> screen.

NOTE

•The surround channels (if any) adjust in tandem. Channel Level changes made via the HTR L70 are retained even if you cycle the receiver through standby.

•Level settings are added/subtracted to the setup levels established by the L70 level-calibration routine, invoked by the HTR L70 “Test” key.

ADJUSTING THE TONE CONTROLS

The L70 bass and treble controls are adjusted using the front panel’s TONE button in conjunction with the

VOLUME knob; see “Front Panel,” above.

NOTE

Bass/treble settings affect only the front left/right channels, and are active in all SURROUND MODEs.

ABOUT THE 12 V TRIGGER OUT

The L70’s rear-panel 12 V TRIGGER OUT is a convenient method of controlling on and off any auxiliary equipment that is connected to or is used in conjunction with the L70, when the L70 is turned on or to standby via remote or the front panel power button.

12 V TRIGGER OUT

The L70’s rear-panel 12 V TRIGGER OUT is a female miniature 3.5 mm stereotype jack that will produce +12 V DC at approximately 50 mA. Use a 3.5 mm stereotype miniature phone plug with the centre pin + 12 V and the first band the ground. We recommend that you use a good quality cable with shield when attaching the 3.5 mm stereotype plug so as to prevent false triggering of the auxiliary equipment due to electro- magnetic interference from nearby electronic equipment. See your NAD audio specialist for more information.

24

Page 23 Page 25
Image 24
Page 23 Page 25
Contents DVD Receiver Safety Precautions IntroductionThis Product to Rain or Moisture Record Your Model Number NOW, While YOU can see ITTable of Contents Getting the Most from the NAD L70 About the HTR L70 System Remote Control Ease of USEUpgradability QuickstartIdentification of controls Front PanelJacks of the VCR Rear Panel Español Italiano Português SvenskaImportant Note Setup Setting UP the L70Getting Started Dealing with HUM and NoiseSetting L70 OSD Language Receiver Section only Input SetupDisplaying the L70 RECEIVER’S OSD Navigating the OSD and Making ChangesInput Selector Speaker Configuration Setting Speaker ConfigurationSurround Mode Level Trim Test SetupSetting Level Trim Delay TimeSetting Speaker Delay Time Using the L70 Adjusting the VolumeOperation Selecting SourcesUsing the L70’S DVD/VCD/CD Press OPEN/CLOSE the Disc Tray OpensAbout DVD/SVCD/VCD/CD Region Management InformationDisc Language Settings OSD OSD NavigationVideo OSD TV DisplayPassword DefaultsSystem OSD OSD LanguageUsing the L70’S AM/FM Radio Choosing the FM Mute / Mode About RDSViewing RDS Text About User NamesAbout the L70’S Surround Modes EarsEnhanced Stereo StereoDolby Digital / DTS Selecting Surround ModesAdjusting Surround Modes DTS Delay TimeDolby Digital Delay Time Enhanced Stereo / Ears Delay TimeAdjusting Level Trim on the FLY To Adjust Level TrimAdjusting the Tone Controls About the 12 V Trigger OUTUsing the HTR L70 Remote Control SpecificationsControlling the L70 Cancel Operation Learning Codes from Other RemotesExample Learning VCR Pause PUNCH-THROUGHCopy a Command from Another KEY Macro CommandsKey Recording MacrosKEY-ILLUMINATION Timeout Factory ResetDelete Mode Executing MacrosSearch Mode Loading CODE-LIBRARIESMode Keys To Press for 3 seconds Checking CODE-LIBRARY NumberSummary of HTR L70 Modes Troubleshooting ReferenceSpecifications Physical SpecificationsAmplifier Section Tuner SectionReference L70 Manual 03/05 China
Top Page Image Contents