Battery Replacement

Applicable battery: Use two “AAA” sized dry batteries or equivalent.

•Point the remote control transmitter toward the remote sensor on the TMX-R705 and use the remote control within 2 meters from the TMX- R705.

1 Opening the battery cover.

Slide out the battery cover while firmly pressing in the direction of arrow.

2 Replacing the battery.

Put the batteries in the case observing the polarities as illustrated.

3 Closing the cover.

Push the cover as illustrated until a click is heard.

Replacing the Dome Light Bulb

	NOTE
	When replacing the dome light bulb, replace with one
	of the specified 12V, 5W capacity. Use of a different
	capacity bulb may cause damage to the unit. Please
	note that no guarantee is carried out if this is the
	case.

1	Use 12V, 5W rated bulb (End Cap Base: T8 x 28)
	available at any autoparts store or consult your
	authorized Alpine Mobile Multimedia dealer for
	further information.
2	Use a flat-bladed screwdriver to release the
	hooks and open the lense, being careful not to
	scratch the product.
3	Pry at two recessed points at rear of lense.		FR
4	Be careful not to crack the lense.
5	Change the bad bulb and press the lense back in
	place.
	Lense	4 Hooks
	4 Hooks	4 Hooks

11-EN