Audiovox 50-0244x-018 SERIES, 50-0244x-001 SERIES II. Preparation of Console for Installation

Page 4

II. PREPARATION OF CONSOLE FOR INSTALLATION

4.Turn console upside down and remove and retain (15) fifteen T-15 TORX screws which secure the cloth covered trim ring to console. See Figure 4.

FIGURE 4

5. Turn console over and open both compartment doors. Carefully separate the console from trim ring. Remove electronic compass from console and lay it in a safe place for use later. Remove and retain velcro tape and lay it in a safe place for later use. Discard cloth covered trim ring.

See Figure 5.

FIGURE 5

6.Cut the orange and black wires from dome light. Cut all wires 7” from tape where indicated.

See Figure 6.

FIGURE 6

4

Image 4
Contents Chevrolet S-10 Blazer Description QTYPreparation of Vehicle Interior II. Preparation of Console for Installation Page Page III. Installation of Console Advised to prevent damage to console or componentsDo not overtighten screws. See Figure