Elite Screens VMAX (PLUS) SERIES, Spectrum manual Trigger

12-V Trigger

The VMAX2 and Spectrum Screens have the capability of using a 12-Volt Trigger. This accessory is optional for Spectrum Screens and can be purchased separately.

Connection pins in side of case

To Projector

Wall-mounted Receiver	Red	DC12V
	Green	0V
(Extension Sensor)
D i a g r a m A
Wall Bo x w ith IR Remo te Con trol

1.Bubble Level: Included with the installation package is a small bubble level that can be useful in determining if the screen is perfectly level when installing.

Video Projection Interface 12-Volt Trigger Assembly

Bubble Level

2. Below is the RF remote with a range of 30 Ft.

(Radio Frequency)

Note: When you get the optional RF, you should follow the instruction and adjust the code.

Diagram B

Infrared “Eye” Sensor with

IR Remote Control

3.Below is the IR remote (Infra Red) with a range of 15 Ft.

(Infra Red)

Note: The light on this remote does not turn on when the buttons are depressed unlike the RF remote.

Radio Frequency Remote Control Infrared Remote Control

www.elitescreens.com / eliteinfo@elitescreens.com