ENGLISH
SPEAKER CONNECTIONS (TRI-MODE)
The ELA265, ELA2100 and ELA2150 are capable of running in a Mono / Stereo mode. This feature gives the amplifier the ability to run stereo satellites (midbass & tweeter) simultaneously with a mono subwoofer.
These connections are more complicated because they require the use of passive crossover networks (Not provided) to divide the frequencies to the speakers. We have included a sample diagram for 4 Ohm connections. If you wish to use multiple speakers to achieve a lower impedance and higher power, it is strongly recommended that you seek professional advice from your BAZOOKA retailer before attempting to make these connections.
Please Note: In the
BRIDGED 
LEFT | RIGHT |
SPEAKERS 
FUSE
PROTECT 25A
POWER
| +12V |
|
|
|
| REM |
|
|
|
| GND | |||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
100 
F
|
| - |
|
|
|
|
|
| |
|
|
|
| 4 mH |
|
| Left | ||
Mid / Tweeter | ||||
4 Ohm |
| |||
(2 Ohm Minimum)
- +
100
F
Right
Mid / Tweeter
4 Ohm
(2 Ohm Minimum)
+-
L E G E N D
Mono Woofer
8 Ohm
(4 Ohm Minimum)
CAPACITOR(COIL)
CAUTION! In Tri- mode operation, the amplifier must see a 2 Ohm load or higher for the stereo
satellites and no lower than 4 Ohms for the subwoofer(s). Any lower than the above mentioned impedance will cause the amplifier to overheat and possibly cause permanent damage to the amplifier.
13