Storing stations

RADIO MODE

Browsing through broadcasting networks (only FM)

If a radio station provides several pro- grammes, you have the option of brows- ing through its so-called “broadcasting network”.

➮Press the or button : to move to the next station on the broadcasting network.

Note:

If you want to use this feature, the RDS function must first be activated.

You will then only be able to switch to stations that you have received once already. To do so, use the Scan or Trav- elstore function.

Setting the sensitivity of the station search mode

You can choose whether you wish to preset only strong or also poor-recep- tion stations.

➮Press the MENU button 8.

➮Press the button : repeatedly until “SENS”appears on the dis- play.

➮Press the button :.

The display shows the currently set val- ue for sensitivity. “SENS 6” denotes maximum sensitivity. “SENS 1” is the minimum.

➮Use the buttons : to set the desired degree of sensitivity.

➮When you have completed the set- tings, press the MENU button 8 or the OK buttons ;.

Storing stations manually

➮Select the required FM memory level, FM1, FM2, FMT or either waveband MW or LW.

➮Tune into the desired station.

➮Hold down one of the preset sta- tion buttons 1 - 6 > on which you wish to store the station for more than two seconds.

Storing stations automatically (Travelstore)

You can store the six stations with the strongest reception in the region auto- matically (only FM). The stations are stored in the FMT memory.

Note:

Stations that were previously stored in this memory are deleted in the process.

➮Hold down the BND / TS button 5 for more than two seconds.

The automatic station-storing procedure begins. “TRAVEL-STORE”appears on the display. Once the process is com- pleted, the station stored in FMT mem- ory location 1 is played.

Listening to preset stations

➮Select the memory or frequency range.

➮Hold down the preset station but- ton 1 - 6 > of the desired station.

DEUTSCH ENGLISH FRANÇAIS ITALIANO NEDERLANDS SVENSKA ESPAÑOL PORTUGUÊS DANSK