HP 83620A, 24A, 22A manual Changing the Preset Parameters, Getting Started Advanced

Changing the Preset Parameters

1.Setup the synthesizer in the desired operation state to be used as the preset state.

2.Refer to menu map 8.

3.Press SYSTEM (e).

4.Select Save User Preset.

5.Select Preset Mode User.

Whenever the (PRESET) key is pressed, the synthesizer will return to the operation state setup and saved in steps 1 and 4. The synthesizer displays:

*** USER DEFINED PRESET RECALLED ***

and also gives you the option of selecting the factory preset state by creating a factory preset softkey.

1-54 Getting Started Advanced