HP 22A, 83620A, 24A manual Awplifier

6RF OUT

AORPTERRF (IF REQUIRED)

IN

nICROUAVE

4-00 AWPLIFIER

RF OUT I’ll-LINE SOURCE NODULE

Figure 1-15. MM-wave Source Module Leveling Using a Microwave Amplifier

1.Set up the equipment as shown.

2.Refer to menu map 1.

3.Select Leveling Point Module.

4.Select Mdl Lev Menu.

5.Select Module Leveling Pt Auto or Front or Rear, depending on where the interface connection is made.

All of the ALC data necessary to communicate properly with the synthesizer is exchanged via the SOURCE MODULE INTERFACE.

Hint	To obtain flatness corrected power refer to “Optimizing Synthesizer
	Performance, Creating and Applying the User Flatness Correction
	Array,” later in this section.

Getting Started Advanced 1-29